Can Trailer Tire & Wheel Combo # AM35351DX be Used with Hub that Uses Wheel Bolts and Not Lug Nuts
Updated 01/09/2017 | Published 01/06/2017
Products Featured in This Question
Question:
My four-by-four trailer hubs take bolts, not lug nuts. Will they work with your tapered-hole steel wheels?
asked by: Seth M
Expert Reply:
Because your hubs take wheel bolts that means that the wheels are hub-centeric meaning it uses the hub to center the wheel. For this design the pilot hole of the wheel has to match exactly with the old wheels. On tire and wheel combo # AM35351DX the center pilot hole is 2.84 inches in diameter.
So if that matches you can use this tire and wheel combo provided that your wheel bolts have the 60 degree coned head. If not you will need to replace them with ones that do have the proper shape. For an example take a look at # RG02-020 which are 1/2 inch wheel bolts with the 60 degree head.
Product Page this Question was Asked From
Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D
- Trailer Tires and Wheels
- Tire with Wheel
- Radial Tire
- Load Range D
- 145/80-12
- 12 Inch
- M - 81 mph
- 4 on 4 Inch
- Steel Wheels - Powder Coat
- Kenda
more information >
Continue Researching
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D
- Shop: Trailer Wheel Bolts - 1/2" Diameter x 1" Long - 60 Degree - Qty 4
- Video: A Closer Look at the Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel
- Q&A: Upgrading From 20.5x8.0-10 To Larger Wheels/Tires On a Trailer
- Q&A: What PSI Should Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel Inflate To
- Q&A: Proper Centering of New Trailer Wheel Whose Pilot Hole is Larger Than Original Wheels
- Q&A: Does Trailer Wheel Pilot Diameter Matter when Picking Out New Wheels
- Q&A: Can Trailer Wheel Pilot Diameter be Larger than Needed and Work
- Shop: CE Smith Trailer Idler Hub Assembly w/ Case for 2.7K Axles - 5 on 4-1/2 - Galvanized - Pre-Greased
- Search Results: galvanized trailer fenders
- Shop: Bearing Kit for 1" BT8 Spindle, L44643 Inner/Outer Bearings, 34823 Seal
- Q&A: Are the Trailer Wheel Bolts RG02-020 Galvanized
- Q&A: How to Determine if a Trailer Wheel is Hub-Centric or Lug-Centric
- Shop: Easy Grease Trailer Idler Hub Assembly for 2K Axles - 5 on 4-1/2 - Galvanized
- Shop: CE Smith Single Axle Trailer Fender - Pre-Galvanized Steel - 12" Wheels - Qty 1
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb E-Z Lube Axles - 5 on 4-3/4
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Trailer Wiring
- Shop: Suspension Enhancement
- Search Results: trailer wiring
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Shop: Brake Controller
- Article: How to Measure for Trailer Hitch Drop
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Search Results: trailer jack
- Video: Measuring To Choose The Right Trailer Axle
on Trailer Tires and Wheels
