Replacement Center Hub Cap For 38-Ft DRV mobile Suite Trailer

Question

Question:

Need hub cap for 2014 drv mobile suite 38 ft. Part number is c-5 . Thanks

asked by: Phil

0

Expert Reply:

In order to be able to make sure you get the correct hub cap for your 38-ft trailer you will need to measure the pilot hole on your wheel with a digital caliper like part # PTW80157.

The cap you came from is designed for wheels with a 3.19-inch diameter pilot hole and this cap has a removable plug that can work with EZ Lube axles.

I have attached a link to our product page for the caps we have available for trailer wheels you can check out.

expert reply by: Jeffrey L

0

Answer 1

Yes, we do have the replacement center caps for the Hi Spec Series 06 Trailer Rim. We have the Replacement Center Cap for 16" Aluminum Hi-Spec Series 06 Wheels - Black item #AM90092B and the Americana Trailer Wheel Center Cap - Plastic item…

view full answer...

Answer 2

The appropriate replacement brake pads for the Kodiak Disc Brake Kit #K2HR79E with the Kodiak 250 calipers are the Kodiak Ceramic Brake Pads for 7000-lb brakes #K250CP , which are designed for the 13" rotors in the #K2HR79E kit. There is also a…

view full answer...

Answer 3

Hi Trevor; if you have 9/16" bolts you need the Kodiak 13" Hub and Rotor #KHR1389D with bearing kit #DX38ER. For 1/2" bolts you need the #KRH1378D with bearing kit #BK3-200. Both can use the Replacement Grease Cap #KPCAP. The…

view full answer...

Answer 4

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 5

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

Hey John, thanks for reaching out. The best way to carry 3-4 bikes on the back of your travel trailer will be to add a trailer hitch, then use a hitch mounted rack. For the hitch, your best bet will be the Curt Adjustable Width Trailer Hitch Receiver…

view full answer...

Answer 9

Hey Steve, The B&W Patriot #BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base…

view full answer...

Answer 10

Hi Glen, It will depend on what the GVWR (gross vehicle weight rating) is of your trailer to determine which B&W 5th wheel to gooseneck adapter will work best for you. Fifth wheels and gooseneck trailers go off of pin weight instead of tongue…

view full answer...

Replacement Center Hub Cap For 38-Ft DRV mobile Suite Trailer

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching