Search: entry step   >  

For Lippert Manual Pull-Out Step #LC432690 the mounting holes are 26-3/8 inches apart on center, side to side, and 7 inches apart on center front to back. The side plates are 16 inches tall. I have included some pictures with these and other…

The best option would be a fold out step setup for your horse trailer where you need a height of 26 inches. The Lippert manual pull out step part #LC432690 would be a fantastic option. When it's out you have 25 inches from the mounting bracket to…

I was able to look up part number 094707-04-700 and find the correct replacement control unit for the Kwikee steps in your motorhome. The correct part is the Replacement Control Unit for Kwikee Electric RV Steps #LC379146.

Hey Linc, you'll have to measure your current steps but as long as the width of the mounting bracket is 25-3/4 inches the part #LC432678 will fit and work great.

If your 1998 Dodge Ram has a factory trailer connector of any kind there will be a connector under the dash to install an electric trailer brake controller like the Prodigy P3 #90195. The adapter to plug into the connector is #3020-P. I've linked…

Great question! The Timbren Silent Ride Suspension for Tandem Axle Trailers w/ 3" Round Axles #TSR14KT01 have an articulation of 1-27/32 so you need to make sure that you have about 4-5/8" of space above your tire. I confirmed this with my…

This particular model of the Silent Ride suspension, #TSR14KT01, is rated for 14,000 pounds and has a 3 inch round axle seat. I have included a picture that shows all of the important measurements for this unit for you as well. Current pricing is…

The Lippert Replacement C-Jack for Lippert Components Electric Ground Control TT #LC404488 that you referenced does come with the motor you see in the product pictures.

Are you sure that's the part number? I wasn't able to find any reference to that. Can you see a brand on the motor?

Yes, we do. We've got three options depending on the height of your entryway. I have listed them below: 2 Steps - MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways item #MR86RR. This will work with entry heights of…

The MORryde StepAbove RV Steps, like part #MR58RR, actually have an adjustment you can make on the latch that I recommend looking at before you start cutting into anything (see attached). If you aren't able to adjust the latch so that you can…

I recommend using the MORryde StepAbove RV Steps for 21-3/4" to 22-1/4" Wide Doorways - 2 Steps #MR86RR, which I was able to confirm with my contact at MORryde will work on your door with 22-1/2" between the flanges. The bracket should…