Metal Fender Recommendation for Roadmaster Tow Dolly RM3477

Question

Question:

Hi, I need to replace the plastic fenders with metal fenders on my Road Master RM3477 car dolly. What do you suggest?? Thanks,

asked by: Charles M

0

Expert Reply:

For your Roadmaster Tow Dolly part RM3477 we have metal fenders. You would want the part # RM-922004 for the driver side and part # RM-922005 for the passenger side.

expert reply by: Jameson C

0

Answer 1

I checked out the master tow dolly 80THD online and it looks like the Fulton Plastic Fender, item #F008554, will mount to the brackets on the tow dolly, as long as the wheels on the tow dolly are no larger than 14 inches. The original equipment size…

view full answer...

Answer 2

The Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Passenger Side item #DM97FR you referenced and the Replacement Fender Assembly for Demco Kar Kaddy 3 Tow Dolly - Driver Side item #DM37FR can be modified to fit your 1999 Master Tow…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The Demco Hydraulic Trailer Brake Actuator part #DM72VR should be a direct replacement for the Atwood 61101 Brake Actuator that you have now. This newest updated it rated at 7K instead of 6K. This is a bolt on option that mounts on 3" centers.…

view full answer...

Answer 5

The manual lockout on your Atwood 85778 surge brake coupler is there so that you can back up the trailer without the brakes locking up on you. Yes you can safely tow your trailer with the broken manual lockout, you just have to make sure you…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

Hey Robert, yes the Kodiak disc brake calipers part #KDBC225DAC that you referenced will replace the Tie Down calipers you have now 46304, they can be used as a left or right hand caliper and does come with ceramic brake pads. If you ever needed…

view full answer...

Answer 8

For as trashed as those brake assemblies are I am impressed with how spotless that spindle is! Based on the bearing numbers you mentioned you have a #84 spindle and the hub part #AKHD-545-35-G-K is correct. Since this its galvanized it's a really…

view full answer...

Answer 9

Unfortunately the Atwood 85736 cannot be replaced so you'd actually need an entirely new actuator. The closest replacement we have is the Demco Hydraulic Brake Actuator #DM72VR. This actuator has a gross towing weight capacity of 7,000-lbs, a…

view full answer...

Answer 10

Demco does not offer a manual lockout for the coupler part #DM72VR but they do offer an electric option with the part #DM5836. They also recommend installing free-backing brake assemblies on the axles instead too which I attached a link to a page…

view full answer...

Answer 11

Since Atwood went out of business none of their actuator (or other product) replacement parts are available unfortunately, so your only real option to having a working actuator is to replace the entire unit. I am attaching a link to our selection of…

view full answer...

Answer 12

I do have a solution I can offer you, but the Atwood AT82543 is no longer available. It was discontinued back in 2017. The closest option we have to replace your Atwood 82543 actuator is part #DM72VR. However, it doesn't have the reverse lockout…

view full answer...

Metal Fender Recommendation for Roadmaster Tow Dolly RM3477

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching