Backing Material and Weight of CE Smith Deluxe Marine-Grade Carpeting

Question

Question:

What is the backing material on this bunk carpeting? Also, what is the weight of this bunk carpet?

asked by: Greg

0

Expert Reply:

I went out to the warehouse to inspect a roll of the bunk carpet # CE11372. The back material is the same as the front but whereas the front is more fluffy, for lack of a better term, the back is matted.

The shipping weight is 2 pounds. The actual weight will be slightly less than that since the packing for this product is very light. As far as a weight or Mil rating it doesn't have one; only that it is marine grade.

expert reply by: Michael H

0

Answer 1

I've never had any bleed through that damaged the hulls of my PWC's but for pontoons (presumably stainless) there is some concern. The CCA used to pressure treat wood several years ago was very corrosive to stainless steel, from what I read…

view full answer...

Answer 2

You certainly could make your own bunk boards using pressure treated lumber and bunk carpet like #CE11372 if you wish. CE Smith doesn't use pressure treated lumber in their bunk boards because some of the chemicals used to pressure treat the…

view full answer...

Answer 3

I am not aware of a bolt-on version of the Buyers Products Weld-On Safety Chain Retainer part #3375471000. However, if all you were wanting to do is mount your safety chains to the tongue of your trailer then you will just simply do so by running a…

view full answer...

Answer 4

Hello again Monty; I would get the black SumoSprings Custom Helper Springs #SS66PV. These have a capacity of 1,800 lbs so it gives you a bit over the blue without overdoing it. SumoSprings are a great choice if you don't want to go with the air…

view full answer...

Answer 5

Hello Barry, Since you already have a weight distribution (WD) hitch and are only experiencing a little rear sag, I recommend going with SumoSprings. I typically only suggest Timbrens for those who are towing heavy loads regularly, as they can create…

view full answer...

Answer 6

Hey Scott, congrats on the new truck. I checked with Timbren's website and they do not go into specifics on how many spacers or what size you're going to need. The instructions for the Timbren Suspension Enhancement System item #T45MR say to…

view full answer...

Answer 7

Hey Eric, the K-Source Tow Mirrors part #KS48NQ that you referenced will fit your 2025 Toyota Tundra Platinum as long as it doesn't have extendable or telescoping mirrors. What are you towing?

view full answer...

Answer 8

Hey Tommy, you would choose the blue SumoSprings #SS46PV for lighter loads, daily driving, and a softer ride, ideal for occasional towing. While black SumoSprings #SS66PV are better for heavier trucks, frequent towing, and consistent loads, offering…

view full answer...

Answer 9

I checked with Timbren, and the overall height (from the top of the bracket that bolts to the frame to the bottom of the spring) is 6 inches for the Timbren Suspension Enhancement System #T45MR.

view full answer...

Answer 10

Hello David, thanks for reaching out. Between the TImbrens and the SumoSprings for your 2024 Toyota Tundra I definitely recommend the Sumos. They have a progressive spring rate so you don't get as rough of a ride when you are unloaded. Since your…

view full answer...

Answer 11

Hey David, I would test fit everything and see which orientation works best. With the spacer or without. Ideally when the kit is installed there will be 1 inch of space between the Timbren and the frame so whichever orientation gets closest to that…

view full answer...

Answer 12

Hey Kirk, for the SumoSprings kit part #SS46PV that fits your 2024 Toyota Tundra you'd need to use the Timbren spacer blocks part #A25723-90AH00 to take up that extra space created by the lift. You'd need 4 of these per side as these are 1…

view full answer...

Backing Material and Weight of CE Smith Deluxe Marine-Grade Carpeting

Product Page this Question was Asked From

Continue Researching