Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use. 1-800-940-8924 to order Fastway accessories and parts part number FA88-00-4500 or order online at etrailer.com. Free expert support on all Fastway products. Great prices and Fastest Shipping for Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 4" Extension - 1,600 lbs. Accessories and Parts reviews from real customers.
All Info
Reviews (26)
Q & A (0)
Related Parts
Photos
Fastway Accessories and Parts
- FA88-00-4500
Camper Jacks
Trailer Jack
Jack Foot
Fastway
2-1/4 Inch Diameter Tubing
Eliminate the need for blocks or hard-to-position jack foot extensions with this unique, flip-up jack foot. No pins or clips to secure. Foot wedges into place quickly and easily, and it automatically folds up beneath trailer frame when not in use.
Features:
Easy-to-use trailer jack foot provides additional height for appropriate clearance
No more wooden blocks or bricks needed to position your trailer
Easily hook up the spring bars of your weight-distribution system
Effortlessly set up trailer for storage
4" Extension minimizes amount of cranking required to position jack
Automatic folding action
Foot flips up as jack is retracted, making storage simple and convenient
No pins or clips needed - foot stays in place when wedged between jack tube and ground
Nothing extra to store or lose
Dependable steel construction
Necessary hardware included
Specs:
Application: square or round jacks with 2-1/4" outer tube
Inner tube must have an outer diameter or width of 2"
Weight capacity: 1,600 lbs
Extension: 4"
Footplate dimensions: 6" wide x 4-1/2" long
Limited 1-year warranty
Note: For the best results, the outer tube of your jack should measure less than 10" from the ground when your trailer is hitched. If the outer tube is more than 10" from the ground, then use a flip-up jack with a 6" extension (FA88-00-6500 - sold separately) instead.
88-00-4500 Fast Way Flip Jack Foot for 2-1/4" Jack Tubing
WARNING: California Proposition 65
WARNING: This product contains chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. For more information, go to www.p65warnings.ca.gov.
Works exactly as advertised. We have a square jock on our trailer, so didn't need the large washers furnished. 3509963
by:
R
10/17/2023
Great product and Trailer has great customer service. It's to bad that the shipping companies do not take better care with the items during shipping! will receive replacement parts to fix what was broken, but it causes lots of extra work for the customer. will have to take complete jack off to replace the broken motor cover because of shipping carelessness!!
regards,
Dan Ewert 1685394
by:
SteveS
12/24/2020
The flip feature is great. The only issue I have found is the A-Frame jack from a different manufacturer allows the flip foot to drag on the ground on some of the transitions such as moving off the road into a parking lot with a little angle. 928447
by:
Preston
09/14/2022
Now this is the greatest thing since sliced bread as they say. My trailer is big. This act as another stabilizer have a flat foot. When in travel mode I've nevered worried about it going down the road. It folds up out of the way. Now I'm one word it's Awesome!! 1406668
by:
Darren
04/05/2018
Another great product from Etrailer with excellent customer service and extremely fast shipping time. Recently purchased and used the Flip on several cargo trailers at my business and decided to put one on my personal camper. Works like a charm! 492904
by:
James
01/21/2021
Saves alot of cranking. Easy installation. I bought the shorter. Wish I'd bought the taller. 940680
by:
Terrence
04/15/2024
Just what I was looking for. Quick shipping 1767566
by:
Mike
03/17/2022
Works great! Will have them on all of my trailers. 1273773
by:
Brian
05/02/2021
Jack foot works great, saves time and is very easy to install. 1027016
by:
Robert
12/31/2021
Works great on my 18’ camper. So easy!1234933
by:
Eddie
03/04/2022
What a difference in the number of cranks need to raise the trailer 1268628
by:
Robert
08/29/2023
Works great! So much better than keeping a 4x4 in the bed of the truck! 1656949
by:
Elvage
06/02/2019
High quality. Very happy with purchase. 652049
by:
Jimmy
05/31/2024
What a great idea! It's very convenient to use and super easy to install. 3148216
Hello Greg,
I’m assuming the overall weight of your trailer is 7,000 pounds. In that case, you’ll just need something to handle the tongue weight of the trailer. Tongue weight typically falls between 10–15% of your overall trailer weight, which would put you between 700–1,050 lbs.
We don’t have anything in a round tube that has a 23" lift, so I’m hoping you’re referring to the overall extended height.
The Round A-Frame Trailer Jack - Topwind - 3,000 lbs # TJA-5000T-B has a 15" lift,... view full answer...
Hey Henry, is the diameter of the jack tube that you are measuring the inner or the outer tube? The Fastway Flip Foot part # FA88-00-4500 was designed for 2-1/4 inch OUTER tube but the correct inner tube diameter is actually 2 inches so there's a really good chance this is correct for you. view full answer...
Hi Jeff!
The etrailer Electric Trailer Jack w/ Foot Plate - A-Frame - 14" Lift - 2,000 lbs # e64GV would be a great option for your 7,000 pound enclosed trailer.
The 2,000 pound capacity would definitely cover you and it uses the standard 3 bolt pattern found on just about every A-Frame trailer. You will need to wire it to a battery on your trailer, but this is honestly the best way to power these kinds of jacks (some vehicles don't work very well with the jacks that utilize the 7-Way... view full answer...
I'm good thanks! Hope you are as well! I don't have a database or any way of knowing how far off the ground your jack is but I can tell you exactly what you'll need to measure!
The 4" Extension Fastway Flip item # FA88-00-4500 should be used if the outer tube of your jack is less than 10" from the ground when your trailer is hitched to your tow vehicle.
If your jack measures 10" or more when hooked up you'll want the 6" Extension Fastway Flip Automatic Fold-Up Jack Foot item # FA88-00-6500.
I... view full answer...
We have an easy solution for your Lippert jack to give it the additional 4 inches of extension you are wanting with the Fastway Flip Automatic Fold-Up Jack Foot # FA88-00-4500. This is the correct size for the jack inner tube diameter of your jack so it will fit easily and it provides and additional 4 inches of jack leg length automatically as you lower the jack. view full answer...
First you are going to want to check the diameter of the opening on your Jayco Baja pop up camper. I have seen several times the round hole is only going to allow for a 2" diameter Jack # DL22530. Otherwise we do have the more common 2-1/4" Jack # TJA-5000S-B like you found. While these jacks do only have a 15" or 15-5/8" extension they do hang a bit lower than your current jack. Also you can use the Flip Foot # FA88-00-4500 on the 2-1/4" jack to quickly gain another 4" of height. Personally... view full answer...
The Fastway Flip Automatic Fold-Up Jack Foot # FA88-00-4500 when folded in the stowed position will reduce ground clearance from the hole in the jack tube by approximately 3-inches. This is shown in the photo I prepared for you. view full answer...
As long as your jack's inner leg has an outer dimension of 2 inches the Fastway Flip Automatic Fold-Up Jack Foot # FA88-00-4500 would fit and work great. You do have to drill a hole in the jack's inner leg to install this which you can see at the attached review video link. This is the 4 inch version which works the best for more applications and would be what I would recommend. While drilling is an extra step it's worth it in the long run for an easier use over time and you wouldn't have... view full answer...
The Atwood Premier Performance Series Power Jack when compared to the Stromberg Carlson Electric Trailer Jack - Drop Leg - A-Frame - 23" Lift - 5,000 lbs - Black # JET-5000 will be slightly slower. The Atwood is a faster jack, but you do miss out on the quality of some components and other features. The Stromberg Carlson jack will be quieter and will also have an automatic shutoff that is much smoother than the Atwood to prevent the motor from retracting or extending too far. It overall... view full answer...
The Fastway Flip Automatic Fold-Up Jack Foot for 2-1/4" Jacks - 6" Extension # FA88-00-6500 will most likely not flip vertical when it makes contact with the ground in the horizontal position. It is designed to flip first when being deployed and flip last when being retracted. I've attached a video of the function to assist. The torque on the assembly under the weight of the trailer would most likely cause malfunction if used in the manner you stated.
If you are unsure of your ground... view full answer...
Yes, the Camco Trailer Tongue Jack Stand # CAM44635 can be used on your trailer with 760lbs of tongue weight. The stand itself is rated for up to 5,000lbs of vertical load. You might consider the Fastway Flip Automatic Fold-Up Jack Foot with a 4" # FA88-00-4500 or 6" # FA88-00-6500 height. This stays mounted to the jack so there is no stand to loose or take up storage space. The 4" foot is rated for up to 1,600lbs while the 6" is rated for up to 1,400lbs of tongue weight. view full answer...
I have not seen any additional add on parts for the Fastway Flip Automatic Fold-Up Jack Foot # FA88-00-4500 that will do what you are looking for. And it can be used on a pop up that is using a 2-1/4" tongue jack.
I recommend the Roadmaster Quick Foot Assembly Tongue Jack Extender # RO84FR as it uses a pin that will lock it in place on your pop up trailer. And since it is height adjustable to 2", 4" and 6" it will adapt to unlevel ground much better.
You should always be sure to use... view full answer...
Yes, the Fastway Flip Automatic Fold-Up Jack Foot part # FA88-00-4500 for 4" or part # FA88-00-6500 for 6" will work with the Bulldog Round, A-Frame Jack - Topwind - 15" Lift - 5,000 lbsItem # BD155032. The Bulldog Round has a 2-1/4" outer tube outer diameter and 2" inner tube which the Fastway Flip is designed for so there will be no compatibility issues. view full answer...
I have a solution for you, but the Bulldog Round, Pipe-Mount Swivel Jack - Sidewind - 15" Lift - 5,000 lbs # BD178203 is not compatible with the Fastway Flip Foot # FA88-00-4500 since the leg and inner tube are a single piece.
Instead, you'd need to use a jack that had a removable foot on the drop leg like the Pro Series Square Jack with Footplate - Drop Leg - Topwind - 28-5/8" Lift - 5,000 lbs # PS1400800383 or the Bulldog Square Jack w/ Footplate - Drop Leg - Sidewind - 28-1/2" Lift... view full answer...
The Fastway Flip Automatic Folding Jack Foot # FA88-00-6500 would be a good solution as long as your loaded tongue weight is not over 1,400lbs.
Based on the dry weight of your trailer you may be close or over the limit for this unit. The # FA88-00-4500 has a maximum tongue weight of 1,600lbs. Which may come closer to your needs.
Both these units have a maximum capacity of 4,000lbs, this is when using the jack to lift both the trailer tongue and tow vehicle to put the spring arms of... view full answer...
We do have other swivel jacks with the same weight rating that will allow you to use a foot like part # FA88-00-4500, but since the Pro Series Jack # PS1401440303 that you referenced has the foot plate welded to the inner leg you will need to go with the Pro Series # PS1400800383 instead.
You can have the pipe mount # TJP-OP58 welded to the jack and the pipe mount # BD005024 welded to your trailer so that the jack can swivel if that is what you are wanting. view full answer...
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.