Where To Install The Roller Bunks, # DL21741, On A 6 Foot Bunk
Published 08/31/2010
Products Featured in This Question
Question:
does the roller bunks have to start at the beginning of the stern or can it start a foot in. I am replacing my 6 bunks with 5 roller bunks
asked by: mike
Expert Reply:
The Dutton-Lainson Roller Bunks, # DL21741, do not have to start at the beginning of the stern. To install the roller bunks on your 6 foot bunks you could mount one 5 foot section on your bunks and leave 6 inches on each end. The 5 foot roller sections require two Dutton-Lainson Roller Bunk Bracket, # DL21742.
You will also want to make sure that the roller bunks will be able to handle the weight capacity of your boat. The weight capacity of the set of two roller bunks is 3,000 lbs.
Product Page this Question was Asked From
Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Boat Trailer Parts
- Bunks
- Roller Bunk
- Galvanized Steel
- Dutton-Lainson
more information >
Continue Researching
- Shop: Dutton-Lainson Boat Trailer Deluxe Roller Bunk - 5' Long Sections - 12 Sets of 3 Rollers
- Search Results: bunk rollers
- Video: All About the Boat Trailer Deluxe Roller Bunk
- Shop: Boat Trailer Deluxe Roller Bunk - 4' Long - 10 Sets of 3 Rollers - by Dutton-Lainson
- Shop: CE Smith Roller Bunks for Boat Trailers - 5 Rollers Each - 4' Long - 1,500 lbs - 1 Pair
- Shop: CE Smith Bolster and Swivel Bracket Assemblies - Galvanized Steel - 9" - Qty 4
- Shop: CE Smith Roller Bunks for Boat Trailers - 6 Rollers Each - 5' Long - 1,500 lbs - 1 Pair
- Q&A: Overall Height Measurement From Top of Roller to Bottom of U Channel on DL21741 Roller Bunk
- Video: In-Depth Review of the Dutton-Lainson Boat Trailer Deluxe Roller Bunk
- Q&A: Distance From Top of Roller to Frame for Dutton Lainson and CE Smith Roller Bunks
- Q&A: Using Bunk Rollers For a Kayak Ramp
- Q&A: Availability of Pontoon Boat Guide Ons that Install on Outside of Tubes
- Q&A: Recommended Roller Bunks For 16' Crestliner Pontoon Boat For Easier Launching
- Q&A: Can Roller Bunks Be Used on Pontoon Boat Trailer
- Q&A: Can A Smaller Tire Be Put On My Trailer To Lower It
- Article: Trailer Tire Sizing
- Search Results: hub grease
- Shop: Trailer Idler Hub Assembly for 2,000-lb Axles - 5 on 4-1/2
- Shop: Kenda 215/60-8 Bias Trailer Tire with 8" White Wheel - 4 on 4 - Load Range C
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Shop: Trailer Wiring
- Search Results: trailer tires and wheels
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Suspension Enhancement
- Article: Trailer Lighting Requirements
- Search Results: trailer wiring
on Boat Trailer Parts
