Replacement 3 Inch Valterra RV Sewer Valve Body

Question

Question:

confused the way this is written, is the valve itself not part of this? I need to replace my valve and need to add my 18inch extension rod. T1003PBC is this part a complete vlave replacement or just body

asked by: Rich

0

Expert Reply:

The # T1003PBC valve is the one you will need for your sewer plumbing. We refer to it as valve body, because it does not include the handle, which you need to operate. Since you have indicated you have a 18 inch extension handle the # T1003PBC is the only part you will need to complete your replacement valve system.

I have linked this product page for your convenience.

expert reply by: Jackie C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 3

Since wire color codes are NOT universal, we always recommend wiring by function, rather than wire color. If you look at the Trailer Wiring FAQ article I have linked you to, you can see some diagrams showing the proper way to wire a vehicle and…

view full answer...

Answer 4

Hello Michael, Thanks for writing in! Yes, you can recreate the setup you have on your 2014 Forest River R-Pod. You won't find it as one single 1-1/2" to 3" bayonet adapter, but you can put it together with two fittings. For your…

view full answer...

Answer 5

In my experience Valterra has been MUCH easier to get in contact with and get parts from than LaSalle Bristol. Dometic is the parent company for Valterra and typically has pretty good customer service every time I've called them. It's a bit…

view full answer...

Answer 6

The gasket is the portion of the gate valve that's allowing waste water to leak through and not actually the gate. Both companies are using a rubber gasket that will eventually fail so it really comes down to the other features of the gate valve…

view full answer...

Answer 7

Hi Gerald! I was going to say you also needed the Blue Ox Base Plate Kit #BX1139 and some wiring to hook the RV to your Jeep, but I see that you realized this and got both. Another potential part you may need is a high low adapter, but you will want…

view full answer...

Answer 8

Yes, it will! You'll want to cut off the 4-way connector of the Curt Custom Tail Light Wiring Kit for Towed Vehicles item #C96JR and install the 6-way connector that comes with the Curt Tow Bar 7-Way to 6-Way Coiled Adapter Cord w/ 6-Way Socket…

view full answer...

Answer 9

The 7-way connector part #HM20048 can work for you but it depends on what type of umbilical coiled adapter you have or plan to go with. Basically Reggie with this installed you'll need to have a 7-way to 6-way round coiled adapter like the part…

view full answer...

Answer 10

Hey Trevor, To flat tow your 2025 Jeep Wrangler Rubicon you'll need the following components: Baseplate: Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. This is a fit for a factory plastic or steel bumper, if you have an aftermarket bumper…

view full answer...

Answer 11

Yes your 2005 Jeep Wrangler does need a supplemental braking system to flat tow in California, and the best option for that is a portable braking system. Not only is it the most economical, but if you wind up changing your towed vehicle at some…

view full answer...

Replacement 3 Inch Valterra RV Sewer Valve Body

Product Page this Question was Asked From

Continue Researching