What is the Overall Height of the CE Smith Bunk-Style Guide-Ons # CE27600

Question

Question:

want to make sure of dimensions of height as they would have to mount on top of channel due to step from fender back to tail light so i still would have to drill for bolts but want make sure of height as so it wont be to high on boat

asked by: Jimmy H

1

Helpful Expert Reply:

The overall height of the CE Smith Bunk-Style Guide-Ons # CE27600 is right at 21 inches.

I also attached an install video for this kit for you to check out as well.

expert reply by: Jameson C

1

Answer 1

Though we do not have an option that would have a perfect 90 degree angle, I may still have something that would work. The CE Smith #CE27610 is a little smaller and typically installed on the outside of a trailer frame, but can be used however…

view full answer...

Answer 2

Yes, the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 can work on the inside of a pontoon boat. Based on the photo you may prefer the CE Smith 90-Degree Bunk Board Guide-On Kit #CE27600K90 which will includes…

view full answer...

Answer 3

You should be just fine with the clearances you listed for the CE Smith Guide-Ons part #CE27600. 3 inches would be great for the horizontal clearance between the guide ons and the pontoons and 1-1/2 inches of vertical clearance would be just fine as…

view full answer...

Answer 4

I have another option for you, but the CE Smith Bunk-Style Guide-Ons for Boat Trailers - 60" Long - 1 Pair #CE27600 you were looking at are designed for standard boats and not Tritoons. Instead I recommend the CE Smith Bunk Style Guide-Ons for…

view full answer...

Answer 5

The guide-ons we have available that are designed specifically for pontoon boats, such as the CE Smith Bunk Style Guide-Ons #CE27671, do all feature a slight angle where the board attaches. I recommend taking a look at the CE Smith 90-Degree Bunk…

view full answer...

Answer 6

Hi John; there is no specific position you need to drill the holes for the swivel brackets on the #CE27600K90. Choose a position that works best for your setup which is likely toward the top. The swivel brackets use a 1/2" bolt, I would hold up…

view full answer...

Answer 7

It sounds like you may be needing a kit like the CE Smith Bunk-Style Guide-On Kit #CE27600K90. We do have just the Upright #CE27608PG and Mounting Bracket #CES94FR individually if that is all you are needing. The U-Bolt Kit #CES44FR will allow you to…

view full answer...

Answer 8

We do have 90 degree uprights for the CE Smith bunk style guide ons with the part #CE27608PG which I am sure could be made to work with the #CE27600 one way or another.

view full answer...

Answer 9

You can install the Bunk-Style Guide-Ons #CE27600 with a bit of modification to fit your 1 inch wide by 3 inches tall trailer. The guide-on is designed to fit a trailer with a minimum of a 2 inch width, with that being said, the modification that…

view full answer...

Answer 10

For your 2021 G3 Bay 18 DLX, the closest option we can offer is the CE Smith Bunkboard Guide-On Kit #CE27600K75, which has 75° posts and will create a more "tucked-in" look, as oppose to the 90° kit #CE27600K90.

view full answer...

Answer 11

The CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 that you referenced comes with guide on bunks for both sides of your trailer. I attached a review video for you to check out as well.

view full answer...

Answer 12

You are right that most boat trailer guide-ons are 90-degree types. Some, like the Fulton Galvanized Roller Guide-Ons #FBGR200101 and CE Smith Bunk-Style Guide-Ons #CE27600 and #CE27660 have a wider angle. All such items are shown on the linked…

view full answer...

What is the Overall Height of the CE Smith Bunk-Style Guide-Ons # CE27600

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching