What Bunk-Style Guide-On For Boat Trailers Will Fit a 1 Inch Wide By 3 Inch Tall Trailer

Question

Question:

CAN I INSTALL BUNK GUIDE ON CE27600 0N A 1foot WIDE BY 3foot TALL TRAIL FRAME

asked by: PAUL H

0

Expert Reply:

You can install the Bunk-Style Guide-Ons # CE27600 with a bit of modification to fit your 1 inch wide by 3 inches tall trailer.

The guide-on is designed to fit a trailer with a minimum of a 2 inch width, with that being said, the modification that would have to be made would be to insert a 1 inch wide solid block at the attachment points and continue installation as though you have a 2 inch wide trailer frame. At this time our manufacturers do not offer a bunk-style guide-on for trailers with a 1 inch wide frame.

expert reply by: Lori W

0

Answer 1

The guide-ons we have available that are designed specifically for pontoon boats, such as the CE Smith Bunk Style Guide-Ons #CE27671, do all feature a slight angle where the board attaches. I recommend taking a look at the CE Smith 90-Degree Bunk…

view full answer...

Answer 2

You are right that most boat trailer guide-ons are 90-degree types. Some, like the Fulton Galvanized Roller Guide-Ons #FBGR200101 and CE Smith Bunk-Style Guide-Ons #CE27600 and #CE27660 have a wider angle. All such items are shown on the linked…

view full answer...

Answer 3

It sounds like you may be needing a kit like the CE Smith Bunk-Style Guide-On Kit #CE27600K90. We do have just the Upright #CE27608PG and Mounting Bracket #CES94FR individually if that is all you are needing. The U-Bolt Kit #CES44FR will allow you to…

view full answer...

Answer 4

I was able to track down some measurements for the 90 degree uprights that are included with the #CE27600K90 bunk kit. Hope this helps. See below: A: Internal Distance - 15-1/2" A: External Distance - 17" B: Internal Distance - 18" B:…

view full answer...

Answer 5

As long as the boards are stable and capable of helping keep the boat steady when loading and unloading, then the distance for the mounting of the CE Smith Bunk-Style Guide-Ons, part #CE27600 can be the distances you mentioned.

view full answer...

Answer 6

Yes, the CE Smith Bunk-Style Guide-Ons #CE27600 does fit trailer frames that are 1-1/2 inch wide by 3 inches tall.

view full answer...

Answer 7

We do have 90 degree uprights for the CE Smith bunk style guide ons with the part #CE27608PG which I am sure could be made to work with the #CE27600 one way or another.

view full answer...

Answer 8

For your 2021 G3 Bay 18 DLX, the closest option we can offer is the CE Smith Bunkboard Guide-On Kit #CE27600K75, which has 75° posts and will create a more "tucked-in" look, as oppose to the 90° kit #CE27600K90.

view full answer...

Answer 9

Since you mentioned wanting the most stability and not always being perfect when loading (understandably), I think the longer, 5 foot (60 inch) CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 is the best option as it will give you the most…

view full answer...

Answer 10

Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part #CE27600K90 so that you'll get closer contact like you…

view full answer...

Answer 11

Hi John; there is no specific position you need to drill the holes for the swivel brackets on the #CE27600K90. Choose a position that works best for your setup which is likely toward the top. The swivel brackets use a 1/2" bolt, I would hold up…

view full answer...

Answer 12

We have the 90 degree roller style of guide ons which would be your best option with the part #CE27600K90. This uses a roller that mounts vertically and will roll as it allows your boat to guide along past it. There isn't a 90 degree version of…

view full answer...

What Bunk-Style Guide-On For Boat Trailers Will Fit a 1 Inch Wide By 3 Inch Tall Trailer

Product Page this Question was Asked From

Continue Researching