Is There 90 Degree Upright Brackets for Use with CE Smith Bunk Guide Ons

Question

Question:

Recently purchased the CE27600 guide on kit. The uprights are at too much of an angle and will not sit close enough to the boat to provide the guidance needed when the boat is being loaded. I noticed there is a 90 degree upright that is available with a different kit. Is it possible to just exchange the uprights or will I need to return the entire kit for exchange?

asked by: Terry H

0

Expert Reply:

We do have 90 degree uprights for the CE Smith bunk style guide ons with the part # CE27608PG which I am sure could be made to work with the # CE27600 one way or another.

expert reply by: Jameson C

0

Answer 1

The overall height of the CE Smith Bunk-Style Guide-Ons #CE27600 is right at 21 inches. I also attached an install video for this kit for you to check out as well.

view full answer...

Answer 2

You are right that most boat trailer guide-ons are 90-degree types. Some, like the Fulton Galvanized Roller Guide-Ons #FBGR200101 and CE Smith Bunk-Style Guide-Ons #CE27600 and #CE27660 have a wider angle. All such items are shown on the linked…

view full answer...

Answer 3

The CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 that you referenced comes with guide on bunks for both sides of your trailer. I attached a review video for you to check out as well.

view full answer...

Answer 4

We have the 90 degree roller style of guide ons which would be your best option with the part #CE27600K90. This uses a roller that mounts vertically and will roll as it allows your boat to guide along past it. There isn't a 90 degree version of…

view full answer...

Answer 5

For your 2021 G3 Bay 18 DLX, the closest option we can offer is the CE Smith Bunkboard Guide-On Kit #CE27600K75, which has 75° posts and will create a more "tucked-in" look, as oppose to the 90° kit #CE27600K90.

view full answer...

Answer 6

I was able to track down some measurements for the 90 degree uprights that are included with the #CE27600K90 bunk kit. Hope this helps. See below: A: Internal Distance - 15-1/2" A: External Distance - 17" B: Internal Distance - 18" B:…

view full answer...

Answer 7

Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part #CE27600K90 so that you'll get closer contact like you…

view full answer...

Answer 8

As long as the boards are stable and capable of helping keep the boat steady when loading and unloading, then the distance for the mounting of the CE Smith Bunk-Style Guide-Ons, part #CE27600 can be the distances you mentioned.

view full answer...

Answer 9

The guide-ons we have available that are designed specifically for pontoon boats, such as the CE Smith Bunk Style Guide-Ons #CE27671, do all feature a slight angle where the board attaches. I recommend taking a look at the CE Smith 90-Degree Bunk…

view full answer...

Answer 10

You can install the Bunk-Style Guide-Ons #CE27600 with a bit of modification to fit your 1 inch wide by 3 inches tall trailer. The guide-on is designed to fit a trailer with a minimum of a 2 inch width, with that being said, the modification that…

view full answer...

Answer 11

Yes, the CE Smith Bunk-Style Guide-Ons #CE27600 does fit trailer frames that are 1-1/2 inch wide by 3 inches tall.

view full answer...

Answer 12

Since you mentioned wanting the most stability and not always being perfect when loading (understandably), I think the longer, 5 foot (60 inch) CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 is the best option as it will give you the most…

view full answer...

Is There 90 Degree Upright Brackets for Use with CE Smith Bunk Guide Ons

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching