Trouble Getting Hitch Pin Holes To Line Up Using Kuat Shank Adapter # D101
Published 01/30/2020
Products Featured in This Question
Question:
I installed the Draw-tite 76271 on my 2020 Subaru Forester following your video made it easy. I went to install my Kuat NV 2.0 with the Kuat 1-1/4inch to 2inch adapter, the pin holes dont line up and the locking hitch pin will not go through. Is the hitch compatible with the rack plus adapter? Thanks
asked by: Eric
Expert Reply:
I reached out to my contact at Kuat, and sent him the picture you attached, and he said that what you are seeing is actually pretty common when using the Shank Adapter # D101. He said the hitch pin holes will indeed be a bit off center when using the adapter to install your NV 2.0 Bike Rack # BA12B, but it should still allow the hitch pin to travel through.
It is important though that you continue to use the smaller 3/8" hitch pin originally included with the bike rack instead of a hitch pin made for your larger 2" receiver. A 5/8" diameter hitch pin, which is what would otherwise be used with a 2" trailer hitch, will not fit. You might also need to come in at an angle to fit through the holes (see attached image).
If you are still unable to properly attach the bike rack please let me know and I will be happy to look into this even further.
Continue Researching
- Shop: Kuat Pivot XD Heavy Duty Swing Away Hitch Extender for Bike Racks - 2" - Passenger
- Q&A: Recommended 2" to 1-1/4" Reducer Sleeve To Use 1-1/4" Bike Rack On Subaru Outback 2" Receiver
- Search Results: hitch adapters
- Shop: Curt Reducer Sleeve - 2" Hitch to 1-1/4" Shank - 4" Long
- Search Results: 3/8" diameter locking hitch pin
- Video: Checking Out the Curt 2 Inch Hitch to 1-1/4 Inch Shank Reducer Sleeve
- Shop: Trailer Hitch
- Search Results: hitch reducer 2 to 1 1 4
- Search Results: trailer hitch reducer sleeve
- Q&A: Troubleshooting Accessory Not Fitting with Kuat Hi-Lo Hitch Extender
- Video: All You Need to Know About the Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks
- Shop: Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks - 1-1/4" and 2" Hitches
- Shop: Kuat Bike Rack Shank Adapter - 1-1/4" to 2"
- Video: Comprehensive Review: Kuat Bike Rack Shank Adapter
- Shop: Kuat Magnetic Hitch Receiver Reducer Sleeve - 2-1/2" to 2" Hitch - 6-1/4" Long
- Search Results: accessories and parts
- Search Results: hitch anti~rattle
- Video: Let’s Check Out the etrailer License Plate Mounting Brackets for Hitch Mounted Cargo Carrier
- Q&A: Which Swing Away for Bike Racks Would You Say is Beefier in Design the Kuat or Swagman?
- Video: Let’s Check Out the US Marine Corps Seal Trailer Hitch Cover
- Search Results: kuat hitch adapters
- Video: All You Need to Know About the Classic Accessories Tow Bar and Weight Distribution Tote
- Video: Review of CURT Hitch Adapters - Reducer Sleeve 2 To 1-1/4 Inch - C49WQ
- Shop: etrailer License Plate Mounting Brackets for Hitch Mounted Cargo Carrier
- Shop: Hitch Lock for Kuat Bike Racks - 1-1/4" Hitches
- Q&A: Adapter to Allow Kuat Sherpa to Fit in 2 inch Trailer Hitch
- Q&A: Why Don't the Pin Holes of my Hitch and Rack Line Up with Kuat Beta When Using 2 inch Adapter
- Q&A: Best Cargo Basket And Hitch Extender For 2019 Jeep Wrangler Unlimited
- Q&A: How Tight Does The Anti-Rattle Device On A Kuat Transfer V2 Bike Rack Need To Be
- Shop: Trailer Wiring