Will Curt Front Hitch part # 31038 Fit a 1999 Ford F-150 with Front Tow Hooks

Question

Question:

1999 ford f-150 lariat 5.4 ltr v-8 with full tow package. Will this part fit and the distance from tow ring bolts are 32. Is 32inch correct for this part? Thanks,

asked by: Ted G

1

Helpful Expert Reply:

For your 1999 Ford F-150 the Curt front hitch part # 31038 has been confirmed as a fit and would work well. The fit info we have for this hitch is that it is for trucks with front tow hooks like yours so it will fit.

expert reply by: Jameson C

1

click to enlarge

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 7

Hey Manny! The Weigh Safe Hitch #WS78RR is not designed to be used with an anti-sway bar or weight distribution hitch. If you wanted to use an anti-sway bar like #17200 you would have to weld on a sway tab like #C45822 which this ball mount isn't…

view full answer...

Answer 8

The front-mount hitch you referenced, Curt #31038, is a correct fit for your 2003 Ford F-150 4 x 4 with factory tow hooks. You will use the original hardware that secures the tow hooks in place, along with the two supplied carriage bolts that come…

view full answer...

Will Curt Front Hitch part # 31038 Fit a 1999 Ford F-150 with Front Tow Hooks

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching