What Material Is Used For Fittings On Demco Hydraulic Brake Hose

Question

Question:

Can you tell me if the fittings on this brake line are stainless steel or something else?

asked by: Quinn

0

Expert Reply:

I called my contact at Demco and they told me that the fittings that are used on all of their brake line and hose products like the Hydraulic Brake Hose, part # DM05982 are made of an E-coat Steel.

When I asked what E-coating is they said it is a coating process similar to galvanizing.

expert reply by: Jeffrey L

0

Answer 1

We actually have the Brake Buddy 32220 reverse solenoid available with the Titan Solenoid Valve Replacement Kit #TK71-755-00. The solenoid itself would be an exact replacement and it features the two mounting holes at the bottom like you described…

view full answer...

Answer 2

It looks like there is a positive terminal connection near the fuse box under the hood of your 2022 Volvo XC40 Recharge that you would use for a jump start situation. Since that should have sufficient 12V power when your vehicle is turned on…

view full answer...

Answer 3

Yes, the brake line part #DM05982 that you referenced has fitting size 3/16 inch which has a thread size of 3/8"-24.

view full answer...

Answer 4

The Demco Hydraulic Trailer Brake Actuator part #DM72VR will take a male 3/8"-24 fitting such as the Demco Hydraulic Brake Hose with Fittings part #DM05982. I am not sure what size fittings you have now but all you would need is an adapter to go…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

What Material Is Used For Fittings On Demco Hydraulic Brake Hose

Product Page this Question was Asked From

Continue Researching