Socket Size Required to Remove the Jounce Bumper on a 2009-2015 Ford F-150

Question

Question:

I couldnt find this answer yet on your website. What size socket is needed to remove the jounce bumper bolt on a 2014 F-150 for your F2525 kit? Thanks

asked by: Randall

1

Helpful Expert Reply:

We used a 14mm socket to remove the jounce bumper on a 2014 and 2015 Ford F-150. The jounce bumper is about 4 inches long, so you will want to use an extension. I would use a 4 inch extension if you are using a standard socket and a 2 inch extension if you are using a deep well socket.

I have attached an installation video for you to check out for the Firestone Ride-Rite Kit, # F2525, on a Ford F-150.

expert reply by: John H

1

Answer 1

Installing the Firestone Ride-Rite Air Helper Springs #F2430 on your 2015 Chevy Silverado 1500 does indeed require you to first remove the factory rubber jounce bumpers on the truck. I spoke with my contact at Firestone and he said that all you will…

view full answer...

Answer 2

The bolt holding on the factory jounce bumper on the 2011 Ford F-150 is a 13mm. You will most likely need an extension to get to the bolt without interference from the jounce bumper.

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 5

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey George! How much does the lift weigh? Since there are no custom fit air bags for your 2026 Honda Odyssey I recommend adding the Timbren Rear Suspension Enhancement System #T26FR. The 3,500 lb capacity will be will be appropriate for a heavy…

view full answer...

Answer 9

Hi Stephen; it is the hitch and not the wiring that causes interference with the hands free liftgate. You will still be able to use this feature with the Curt Trailer Hitch Receiver #C64NR. Even if there is some interference, you won't loose the…

view full answer...

Answer 10

I recommend using the Timbren Rear Suspension Enhancement System #T26FR for your 2018 Honda Odyssey. Currently (June 2020) SumoSprings doesn't have a fit for your vehicle so we would need to get all of the measurements that you see in the…

view full answer...

Socket Size Required to Remove the Jounce Bumper on a 2009-2015 Ford F-150

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching