Replacement Hook For Thule T2 Bike Carrier

Question

Question:

The hook on my 916/917 T2 broke due to rust. part no. looks like 753-3583/ Thule pls advise how I can get part and at what cost.

asked by: Richard F

0

Expert Reply:

We do have the Replacement Hook for Thule T2 Bike Carrier, part # 753-3583. this hook will work with the TH916XTR bike carrier.

You can just visit our website and type 753-3583 in the search box. Then add as many as you need to the cart and order. It's that easy. The price for any of the products we offer on our website is shown on the product page.

expert reply by: Jeffrey L

0

Answer 1

Hello Matt, thanks for reaching out. The ratcheting hooks on the Thule T2 Bike Rack should both be the same length. It could be the previous owner broke or lost one and replaced it with whatever they had available at the time. What model of the T2…

view full answer...

Answer 2

Sure can! From the lowest point at the bottom to the highest point at the bend the Replacement Hook item #753-3583 is 12" long. I have linked a diagram below.

view full answer...

Answer 3

The replacement arm #753-3583 is 12 inches from the inside of the hook to the end where it attaches to the ratchet arm, so it is an exact replacement and there aren't any longer versions available. The Thule T2 bike rack TH9045 should be able to…

view full answer...

Answer 4

If you're only hauling one bike, then the Benton LittleShift Bike Rack item #B54VR is definitely going to get the job done. It's wheel mount capability is going to allow you to not only secure your bike but avoid having to clamp down on your…

view full answer...

Answer 5

Hello Fillip, Good afternoon to you as well. I was able to get out to the warehouse to get that measurement. On the Benton LittleShift Bike Rack for 1 Bike #B54VR from the hitch pin to the furthest part of the rack is 22". You can compare this…

view full answer...

Answer 6

It sounds like you're looking for the: -Replacement Locking Ratchet Arm Assembly for Thule T2 Hitch Bike Rack or Sidearm Roof-Mount Rack #753-3579 . This ratcheting arm assembly is a direct replacement for your Thule T2 Bike Rack, and is the part…

view full answer...

Answer 7

Replacement Locking Ratchet Arm Assembly #753-3579 is the same one that originally came on your T2 bike rack so it would not offer any additional length. There is a longer one, #752-1272-001, which is 31-1/2 inches long overall which is about 2…

view full answer...

Answer 8

The Thule T2(917) bike rack should fit up to a 29" diameter tire that is 3" wide with the stock parts according to Thule. So the Replacement Locking Ratchet Arm Assembly #753-3579 and Replacement Hook #753-3583 are going to be the same size…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

Hello Lou, thanks for reaching out. The hitch pin you are looking for is the etrailer D-Shape Anti-Rattle Locking Hitch Pin for Benton Hitch Accessories #e43JR. This will work with the Benton #B54VR bike rack you mentioned, as well as the #B54FR,…

view full answer...

Answer 12

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Replacement Hook For Thule T2 Bike Carrier

Product Page this Question was Asked From

Continue Researching