Weight of the Head and Slider of the Curt Q20 Fifth Wheel Hitch part # C16530-16020

Question

Question:

what is the weight of the base slider and hitch head when they r separatt

asked by: Rick R

0

Expert Reply:

The head of the Curt Q20 Hitch part # C16530-16020 weighs 108 lbs and the roller weighs 170 lbs.

I attached a review video for this hitch for you to check out as well.

expert reply by: Jameson C

0

Answer 1

Both the Curt #C57FR Q20 and #C84FR A20 are compatible with the pucks in the bed of your 2021 GMC Sierra 2500 long bed. There are a few important differences. The A20 uses an interlocking jaw that holds the king pin tightly all around its 360º…

view full answer...

Answer 2

The Curt A16 5th Wheel Trailer Hitch w/ Slider #C16520-16020 weighs approximately 254 pounds and the Curt Q20 #C16530-16020 weighs in at 278 pounds. The Demco Hijacker Autoslide 5th Wheel Hitch #DM8550024 is a bit heavier than both the Curt models at…

view full answer...

Answer 3

As far as height adjustability and weight capacities the Curt Q20 #C16130 and the Curt A20 #C16140 are identical. They both have a Gross Towing Weight of 20,000 lbs, a Vertical Load Limit of 5,000 lbs, and a height range of 13-17 inches. When it…

view full answer...

Answer 4

The Curt A20 5th Wheel Trailer Hitch w/ R20 Slider #C16541 weighs 228 lbs when combined as a complete hitch. The head assembly #C16540 weighs 103 lbs and the R20 slider #C16550 weighs 126 lbs when shipped separately. That extra pound is in the…

view full answer...

Answer 5

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

Hey Robert, congrats on your new 5th wheel trailer! It is highly recommended to use a sliding hitch like the B&W Companion item #BWRVK3370 the shorter 6-3/4' bed on your 2026 Ford F-350. The slider will ensure you have clearance when making…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 10

With a 2022 F350 short bed, hitting the top of the bed rails should not be an issue with most campers. Turning clearance however, will certainly be a factor. That is one advantage of the Andersen Ultimate hitch #AM3200, as it provides a 9"…

view full answer...

Answer 11

If you're wanting to install the Timbren #TFR350SDJ on your 2022 Ford F-350 then you'll want to measure the distance from where your factory bump stops are installed down to the point of contact on the axle. The Timbren #TFR350SDJ are…

view full answer...

Answer 12

Hey Sam! For your 2026 F-350 we have the TorkLift Tie Downs - Custom Frame Mount - Front and Rear #TL87DR. The step will not interfere with the tie-downs so that won't be a problem. See the attached photo. You will also need the TorkLift Locking…

view full answer...

Weight of the Head and Slider of the Curt Q20 Fifth Wheel Hitch part # C16530-16020

Featured Help Information

Miscellaneous Media

Continue Researching