Does the Curt Pop-In Ball C60601 Require Grease on the Shaft that Slides in Hitch

Question

Question:

Besides greasing the ball itself should I grease the shaft with the ball bearings in it?

asked by: Michael J

0

Expert Reply:

I checked with Curt and for the ball portion on the side of the Curt Pop-In Ball for Factory Ford and Ram Underbed Gooseneck Hitches # C60601 they recommend to lube it periodically with silicone spray to prevent rust and corrosion.

expert reply by: Jameson C

0

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 3

The plate you are referring to in the RoadActive Suspension Custom Leaf Spring Enhancement Kit - Heavy Duty #RAS3611-CHD will replace the upper overload on your suspension if you have it.

view full answer...

Answer 4

Hey Mark, thanks for writing in. I can definitely help you find the right gooseneck pin box for your Alliance, but I will tell you that typically, the height of the goosebox is very similar to the height of the pin box and 5th wheel hitch it is…

view full answer...

Answer 5

Hey Travis! The right MORryde GooseTech depends on the pin box bolt pattern and GVWR of the Solitude 310GK. If it is a little older it probably has a Lippert 1621, I believe the newer models use the Lippert Rhino. You can ask whoever you're…

view full answer...

Answer 6

Hey Sean, welcome back! We do have a video showing the B&W Turnoverball #BWGNRK1320 being installed on a 2022 Ram 3500. I have provided a link to the video below. We don't have any videos showing how to remove the factory puck system though,…

view full answer...

Answer 7

Hello Jay, thanks for reaching out. The Curt Pop-In Ball #C60601 is 6-13/16" tall overall. I have included a picture with some dimensions for your reference. Why are you needing the ball to be a specific height? Just curious.

view full answer...

Answer 8

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part #C60629 which has a rise built-in or…

view full answer...

Answer 9

The gooseneck ball that came with the B&W Ball and Safety Chain Kit item #BWGNXA2061 is too tall. You will need to use the Curt Pop-In Ball item #C60601 instead. I have linked a diagram below that will show you the dimensions. It does come in a…

view full answer...

Answer 10

Hey George, welcome back. I double checked with the manufacturer and the Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box item #GY38FR is the correct option to replace your MORryde part number SPB72-1621HD. It works with pin weights from…

view full answer...

Does the Curt Pop-In Ball C60601 Require Grease on the Shaft that Slides in Hitch

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching