Availability of Longer Wiring Harness for Superwinch Winch 2 Go # SW1140232
Updated 11/30/2015 | Published 11/28/2015 >
Products Featured in This Question
Question:
I just purchased a Superwinch Winch 2 Go and realized the wiring set up on the winch is not long enough to reach from the trailer to the truck battery. Is it possible to get a longer wiring kit with the connector for the winch and alligator battery clips that will reach from the truck battery to a trailer? I am using a Ford F250 extended cab. I would rather not use a separate battery mounted on the trailer due to the use of multiple trailers to use this winch on.
asked by: Neal
Helpful Expert Reply:
Your best bet to install the Superwinch Winch 2 Go in the manner you described would be to use the Bulldog Winch Wiring Kit, part # BDW20206 along with part # DL24085. You would then remove the connectors on the # BDW20206 and replace them with those provided by part # DL24085. Once the connectors are replaced, the quick disconnect provided by the wiring kit would plug right into the connector on the winch.
According to my Superwinch contact, a longer power cord that has the alligator clips to connect to the battery isn't offered. The # BDW20206 would be a good alternative that would stay permanently wired to the truck and wouldn't require opening the hood and connecting to the battery each time you wanted to use the winch.
Product Page this Question was Asked From
Superwinch Winch 2 Go Portable Winch - Synthetic Rope - Hawse Fairlead - 4,000 lbs
- Electric Winch
- Trailer Winch
- 1.0 HP
- 2001 - 4000 lbs
- 41 - 50 lbs
- Slow - 0 to 4 fpm
- Plug-In Remote
- Synthetic Rope
- Superwinch
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Superwinch Winch 2 Go Portable Winch - Synthetic Rope - Hawse Fairlead - 4,000 lbs
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Q&A: What Winch Cover Fits My Superwinch SX10SR to Avoid Snow and Dirt?
- Q&A: Winch Recommendation for Car Trailer
- Q&A: Will Superwinch Hitch Mounted Winch Mounting Plate with Handles Fit with Superwinch S9000
- Q&A: Will Superinwinch SW1475201 Fit Superwinch Hitch Mount # SW2050
- Q&A: Will the Draw-Tite Front Hitch for a 2019 Toyota 4Runner TRD Work With KDSS
- Q&A: What Winch do You Recommend for Pulling a 3,500 Pound Car on a Trailer?
- Q&A: Picking Out Winch to Pull Floating Dock Out of Lake
- Article: How to Wire an Electric Winch
- Article: Best Tire Chains
- Article: Finding the Right Electric Winch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Choose the Right Trailer Hitch Class



