Locking Lug Nut Recommendation for a RV Forest River Grey Wolf 26RR

Question

Question:

Sirs Do you have a locking lug nut set for a RV Forest River Grey Wolf 26RR ? It has some very nice rims on it . Thanks

asked by: Michael A

0

Expert Reply:

We only sell one locking lug nut for trailer rims at this time, part # RG01-150. As long as you have 1/2-20 sized wheel studs this lock would work well for you.

I attached a review video for these locking lugs for you to check out as well.

expert reply by: Jameson C

0

Answer 1

I recommend the Master Lock Trailer Hitch Receiver Lock and Coupler Lock Set #3794DAT for your 2022 Forest River Cherokee Alpha Wolf 33BH-L. This lock set includes a receiver hitch lock for 2" and 1-1/4" receiver, coupler latch lock and…

view full answer...

Answer 2

I have another option, but unfortunately none of the cargo carrier bike rack combos are rated for use on a 5th wheel trailer like your 2021 Grand Design Reflection. Instead I recommend using a front mount trailer hitch receiver on your truck with the…

view full answer...

Answer 3

That is a strange issue to have. The issue may be with one of a few parts. It could be that the motor is stuttering before the steps are fully retracted causing them to retract as it thinks that it may be hitting something. The controller may be…

view full answer...

Answer 4

I recommend the Seaflo Diaphragm Pump for Boats and RVs #SE58FR to replace your current Shurflo 2088-422-444. The Seaflo is 12v and 45 psi just like your current Shurflo but has 3.0 gallons per minute compared to the 2.8 gallons per minute your…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 12

Hey Ken! Instead of worrying about fitment and a potential return I can give you some measurements so you can figure it out before ordering. The standard shank on the B&W Continuum Weight Distribution System #BW28FR is 11-3/8" from the…

view full answer...

Locking Lug Nut Recommendation for a RV Forest River Grey Wolf 26RR

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching