Does Replacement Velcro Strip for Access Tonneau Covers have an Adhesive Back

Question

Question:

Is the hook portion of this Velcro adhesive backed?

asked by: Sean R

1

Helpful Expert Reply:

Replacement Velcro strip # A60270 does not have an adhesive back. It fits into a channel on the side rails on Access Tonnosport and Vanish tonneau covers. If you can tell me which tonneau cover model you have I can determine if we have the replacement Velcro or hook and loop strip for it.

expert reply by: Michael H

1

Answer 1

The only difference between the Access Replacement Velcro Strips #A30474 and #A60270 is that A30474 is 1-1/2 inches wide and A60270 is only 1 inch wide. They are both 17 feet long and come with the 4 screws to help keep them in place.

view full answer...

Answer 2

I went out to our warehouse to take a look at the Access Replacement Adhesive Velcro Strip #A20790 referenced in your question. The velcro strip itself measures 1-1/4 inches wide and not 1 inch. The adhesive strip is wider. For a 1 inch wide Access…

view full answer...

Answer 3

It sounds like you are needing to replace the velco strip that is used for your older style tonneau cover. I recommend taking a look at the Access Replacement Velcro Strip #A60270, which measures exactly 1 inch wide. This is designed for Access…

view full answer...

Answer 4

I'm going to need you to measure the width of the Velcro strip of your Access tonneau cover. If the width his 1-1/2 inch you'd need the part #A30474, if it's 1 inch you'd want the part #A60270, or 1-1/4 inch part #A20790.

view full answer...

Answer 5

I have an answer for you. Unfortunately, we do not carry Gator-brand tonneau covers, so we will not be able to confirm for sure if our replacement replacement Access Velcro strips will fit your tonneau. However, judging by your attached picture and…

view full answer...

Answer 6

We have replacement tonneau cover Velcro that is exactly 1-5/16 inches wide with the Truxedo part #TX1115174 which would fit your rails. It can be cut down shorter too as it is 80 inches long.

view full answer...

Answer 7

The best way to pick out replacement velcro strips for a tonneau cover is first determining the brand and model of the cover that you have and then going by what the manufacturer offers as a replacement. The part #A60270 that you referenced is the…

view full answer...

Answer 8

The correct replacement Velcro for the Access Vanish tonneau covers is part #A60270.

view full answer...

Answer 9

I reached out to my contact at Access and the replacement cover is #A22020191. The replacement Velcro for the frame is the Replacement Velcro Strip for Access Tonneau Covers - 1" x 17' #A60270.

view full answer...

Answer 10

The Replacement Velcro Strip for Access Tonneau Covers - 1-1/2" x 17' #A30474 is made for Access tonneau covers, but that it is not to say that it cannot be used on your Lund Rollup L96092. We do not carry any Lund tonneau covers or parts. I…

view full answer...

Answer 11

We currently have a 1-1/4" Wide #TX1115173 and 1" Wide #TX1117877 Velcro strip for tonneau covers. These are the closest we have to the 1-1/8" measurement you have. These are both 8' long as they can be trimmed down to fit your…

view full answer...

Answer 12

The Replacement Adhesive Velcro Strip #A20790 is 16' long x 1-1/4" wide, and I believe that's what you were referring to by hook portion, and yes it is correct. We do not carry Lund tonneau covers or their replacement parts so while I…

view full answer...

Does Replacement Velcro Strip for Access Tonneau Covers have an Adhesive Back

Product Page this Question was Asked From

Continue Researching