Fifth Wheel Trailer Stabilizer Recommendation for Trailer that Uses Andersen Ultimate Adapter

Question

Question:

What kind of 5th wheel stabilizer is recommended for a 5th wheel that is converted from a traditional pin configuration to a receiver style to accommodate an Andersen Aluminum Ultimate 5th Wheel Connection. I have a Denali 293RKS. The hitch weight is just over 2000 lbs. Thank you.

asked by: Fred G

1

Helpful Expert Reply:

Since you have an Andersen Ultimate Fifth Wheel Attachment like part # AM3225 the only option you can use for a stabilizer like the part # UF19-950450 would be one designed for a gooseneck hitch like part # UF19-950400 since the Andersen uses a gooseneck style ball.

expert reply by: Jameson C

1

Answer 1

The Replacement Ball Assembly #UF19-001057 that you referenced can be used with an Andersen Ultimate fifth wheel adapter but it has to be used with an Ultra Fab stabilizer like the #UF19-950500 since we can't guarantee it would work on an EAZ…

view full answer...

Answer 2

Sounds like you are looking for the part #UF19-001057 which is just the ball assembly of the part #UF19-950450. This is designed to also be used like you mentioned and can convert an Ultra Fab tripod designed for a fifth wheel hitch to fit a…

view full answer...

Answer 3

If you have the Andersen Ultimate Connection 5th Wheel Trailer Hitch System with the adapter to connect a fifth wheel king pin to the gooseneck hitch then you can use Ultra-Fab Gooseneck Trailer Tripod Stabilizer - Steel - 31" to 54" -…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 11

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...