Recommended Brake Line Kit for Use With Titan Model 60 Brake Actuating Coupler

Question

Question:

Is there a recommended brake line kit for use with a Titan brake actuator coupler?

asked by: Stephen E

0

Expert Reply:

The brake line kit that would be best for you will depend the number of brake assemblies, the length of the trailer and whether the brakes are drum or disc.

If you have a single axle trailer using drum or disc brakes, and the distance between the actuator and the rear axle is less than 18 feet, the Kodiak # 18SI-BLKIT would work great. The flex hose is easy to work with, and you'll have no worries about a kinked brake line.

For a tandem axle trailer with an actuator to rearmost axle distance less than 20 feet, use # 20TA-BLKIT or for less than 25 feet, use # HS496-252. I've linked you to some FAQ articles about trailer brakes, I hope you'll find them helpful.

expert reply by: Mike L

0

Answer 1

Hey David, all you need to convert your drum brakes to disc is that kit, the Hydrastar Disc Brake Kit w/ Actuator for Tandem Axle Trailers #HYD34VR you were looking at. This kit includes the new actuator, brake lines, fittings, and the new rotors /…

view full answer...

Answer 2

If you are wanting to replace the entire surge brake actuator on your Four Winns Horizon 190 boat trailer then I have exactly what you will need. I recommend using the Dexter Disc Brake Actuator part #099-175-20. This actuator works with 2"…

view full answer...

Answer 3

It should, Gene. The DeeMaxx Hydraulic Brake Line Kit #DE37SR is designed for triple axle trailers, and will work great with with disc and drum brakes. You're just going to need to make sure the fitting sizes are the right size. This kit uses…

view full answer...

Answer 4

Hey Jay! Replacement calipers can be tricky, especially with some of the older brands that are no longer around. Assuming all of that information is correct, the Dexter Premier Disc Brake Kit #T2HRCM10DAC will fit and work well as a replacement. The…

view full answer...

Answer 5

Hi Cw; sorry for the delay on this one we are behind. If you can tell me what kind of spindle you have on those axles, or just tell me the bearing and grease seal part numbers, I can find the right disc brakes for the trailer.

view full answer...

Answer 6

It sounds like you need the Hydrastar Electric Over Hydraulic Actuator Adapter Module #HBA-CAM for the OEM brake controller on your 2022 Ram 3500. This will ensure that your controller works properly with the Hydrastar Electric Over Hydraulic…

view full answer...

Answer 7

The Hydrastar Vented Marine Electric Over Hydraulic Actuator for Disc Brakes #HS481-8067 is designed to be completely plug-and-play so the female end of the 7-way would need to connect to the 7-way cable that's already installed on the trailer…

view full answer...

Answer 8

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 9

The MORryde RV Cargo Sliding Tray - 72" x 33" - 2 Way Slide - 80 Percent Extension part #MR96FR weighs around 110 lbs. The MORryde RV Cargo Sliding Tray - 60" x 33" - 1 Way Slide - 60 Percent Extension part #MR56FR weighs around…

view full answer...

Answer 10

If you already tested the outlet and are receiving power and the fuse is good inside of your monitor cord and the monitor still will not turn on then you will need to replace the monitor as something internal must be wrong with the monitor. You can…

view full answer...