What is the Height of CE Smith Replacement Guide-On Post 27608PG and those in Kit 27660

Question

Question:

Are these posts similar in size as the posts in the 27660 kit? I realize that they are 90 degrees instead of 75, but I am wondering if the upright portion of these are as tall as the posts in the 27660 kit. Thank you!

asked by: Bob

1

Helpful Expert Reply:

Replacement post # CE27608PG is 18 inches tall. The posts in bunk guide-on kit # CE27660 are 21 inches tall. So they are very close but not exactly the same height.

expert reply by: Michael H

1

Answer 1

It sounds like you may be needing a kit like the CE Smith Bunk-Style Guide-On Kit #CE27600K90. We do have just the Upright #CE27608PG and Mounting Bracket #CES94FR individually if that is all you are needing. The U-Bolt Kit #CES44FR will allow you to…

view full answer...

Answer 2

When it comes to The CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair #CE27620 the replacement guide on is #CE11339 and The Replacement Upright #CE27608PG. This replaces 1 PVC pipe for CE Smith 40 inch tall post-style…

view full answer...

Answer 3

We certainly do have a 90 degree version, it's part #CE27608PG. The replacement upright doesn't include the mounting hardware, which is sold separately as part #CE11452-A.

view full answer...

Answer 4

There is an upright which may work for you, the Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat Trailers - Lanced - 39" #CE27605PG. This upright has a bottom leg of 23 inches, and is a replacement for CE Smith Post-Style Guide-Ons…

view full answer...

Answer 5

Hey Steven! The etrailer Rust-Resistant 3-Leaf Double Eye Spring for 4K Trailer Axles - 25-1/4" Long - Dacromet #e93SR will be adequate for your 2020 Gulf Stream Vista Cruiser since the Dexter D40 number correlates to a 4,000 lbs hub and drum…

view full answer...

Answer 6

Hey Mark. There is not a bushing on the hangers used on slipper spring trailers like item #e33SR. Smaller single axle trailers will have a bolt that runs through the hanger, some larger and tandem axle trailers will have a welded tube that the spring…

view full answer...

Answer 7

I was able to track down some measurements for the 90 degree uprights that are included with the #CE27600K90 bunk kit. Hope this helps. See below: A: Internal Distance - 15-1/2" A: External Distance - 17" B: Internal Distance - 18" B:…

view full answer...

Answer 8

Your 4-pin/5-wire wiring harness is what is called a "wishbone" type which simply means that there are two separate running light wires, one brown and one pink. This allows a separate running light wire for each side of the trailer which…

view full answer...

Answer 9

Since the outside frame channel on your trailer is about as wide as your boat you'd need to go with a guide on that has a 90 degree angle for the upright posts instead like the part #CE27600K90 so that you'll get closer contact like you…

view full answer...

Answer 10

The Dexter DX7.5L A-60 Brake Actuator w Electric Lockout #DX56FR is designed to fit inside the tongue of a trailer, yes, but aside from that it doesn't look like it's a direct replacement for the one that came on your Ranger Boat Trailer. As…

view full answer...

What is the Height of CE Smith Replacement Guide-On Post 27608PG and those in Kit 27660

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching