Replacement Upright Posts for the CE Smith Guide Ons

Question

Question:

Can I just buy the galvanized l brackets for the post style guide ons 40 foot dont need the pvc .l brackets are rusted out but pvc is still good .Thanks

asked by: John H

0

Expert Reply:

We certainly do have a 90 degree version, it's part # CE27608PG. The replacement upright doesn't include the mounting hardware, which is sold separately as part # CE11452-A.

expert reply by: Jameson C

0

Answer 1

It sounds like you may be needing a kit like the CE Smith Bunk-Style Guide-On Kit #CE27600K90. We do have just the Upright #CE27608PG and Mounting Bracket #CES94FR individually if that is all you are needing. The U-Bolt Kit #CES44FR will allow you to…

view full answer...

Answer 2

Replacement post #CE27608PG is 18 inches tall. The posts in bunk guide-on kit #CE27660 are 21 inches tall. So they are very close but not exactly the same height.

view full answer...

Answer 3

When it comes to The CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair #CE27620 the replacement guide on is #CE11339 and The Replacement Upright #CE27608PG. This replaces 1 PVC pipe for CE Smith 40 inch tall post-style…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Answer 6

Hey Lewis, the CE Smith Post-Style Guide-Ons for Boat Trailers #CE27620 would be what you'd want as these are galvanized as well just like your trailer so it will do a better job fighting corrosion than a raw steel. These are also 40 inches tall…

view full answer...

Answer 7

The CE Smith Roller-Style Guide-Ons for Boat Trailers #CE27610 measure 17-1/2 inches horizontally. It mounts on 3 inch frames and roughly 3 inches of it is a portion which cannot be adjusted to so you will have approximately 11-1/2 inches that you…

view full answer...

Answer 8

I do have a solution for you but all of our CE Smith Post-Style Guide-Ons like part #CE27620 have a maximum distance of 13" from the inside of the post to the outside of the trailer frame (see photo). In order to obtain 24" the best option…

view full answer...

Answer 9

Thanks for reaching out Paul, you've asked something that I'm sure many others would like to know. You’re correct, the standard and even larger U-bolts won’t work well with your Venture trailer’s 3" x 5-1/2" aluminum I-beam. They’re…

view full answer...

Answer 10

Hey Tom, I know exactly what you’re running into but I have good news! We do have an option that’s built for your 3-1/2 inch beam. The CE Smith post style guide-ons, part #CE27637, are designed to fit frames up to 3-1/2 inches wide, so you’ll get a…

view full answer...

Answer 11

There is an upright which may work for you, the Replacement Upright for CE Smith Bunk-Style Guide-Ons for Boat Trailers - Lanced - 39" #CE27605PG. This upright has a bottom leg of 23 inches, and is a replacement for CE Smith Post-Style Guide-Ons…

view full answer...

Answer 12

Hi Kuer! The mounting bracket for the CE Smith Post-Style Guide-Ons for Boat Trailers - 40" Tall - White - 1 Pair #CE27620 (the #CES94FR), measures 4" wide and 4-5/8" long (see included image). So only having three inches of space to…

view full answer...

Replacement Upright Posts for the CE Smith Guide Ons

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching