Recommended fifth Wheel Hitch And Under Bed Rails For 2013 Ford Truck With Ride-Rite Air Suspension
Updated 06/22/2015 | Published 06/19/2015 >
Products Featured in This Question
Question:
i have ride-rite air bags already installed. how do i install the frame rails with the ride-rite bolts going through the frame of the truck where the hitch frame will be installed?
asked by: Doug
Expert Reply:
There are a couple solutions to install a fifth wheel hitch on your truck.
An option would be to remove the Ride-Rite system and install Timbrens like part # TFRTT350F. The installation of these will not require a bracket with a bolt that runs through the frame rail and interfere with the installation of the # RP30126.
Another option, and the one I recommend is to install a B & W Fifth Wheel Hitch like part # BWRVK3500-5W, and the Custom Installation Kit, part # BWGNRK1111-5W. This system has an existing hole in the frame mounting bracket that the bolt head will not interfere with. You would still be able to use the Ride-Rite system you have installed in your truck and have a nice underbed mounting system for the B & W fifth wheel hitch.
If you want the under bed appearance for a fifth wheel hitch and want to install the # RP30126, you would have to drill a hole in the bracket to allow the head of the bolt on the Ride-Rite system. This would void the warranty for the hitch, which I do not recommend.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Suspension Enhancement
- Search Results: lunette ring
- Shop: Timbren Rear Suspension Enhancement System
- Q&A: Timbren Recommendation for 2015 Ford F-350
- Video: Detailed Breakdown of the Timbren Suspension Enhancement System-TFRTT350F
- Shop: Trailer Hitch
- Shop: Timbren Suspension Enhancement System - Severe Service - Rear Axle
- Q&A: Solution for Reducing Harshness In Ride Quality of Timbren Kit TFTTT350F
- Q&A: Will Timbren Springs Fit On 2013 Ford F-250 Without The Raised Bump Stop Above The Axle Tube?
- Shop: Timbren Suspension Enhancement System - Severe Service - Rear Axle
- Shop: Timbren Rear Suspension Enhancement System
- Shop: Timbren Rear Suspension Enhancement System
- Q&A: Can Timbren Kit for 1999 Ford F-250 Fit with Fifth Wheel Rail Kit
- Q&A: How Big of a Gap Should the Timbren Severe Service Have? Which Ones are Right for My Truck?
- Q&A: Which Weight Rating Timbren Rear Suspension Enhancement Should I use on my 2009 Ford F-250
- Video: Feature Review Curt Pintle Hook for 2-1/2" Hitches
- Video: Timbren Rear Suspension Enhancement Test Course TFRTT350F
- Video: All You Need to Know About the Curt Pintle Hook for 2" Hitches
- Shop: Curt Pintle Hook for 2" Hitches - 20,000 lbs
- Shop: Curt Pintle Hook for 2-1/2" Hitches - 20,000 lbs
- Q&A: What are the Torque Specs for the Buyer's Products Bolt-On 2-1/2" Hitch Receiver Tube?

