All You Need to Know About the Curt Pintle Hook for 2" Hitches Video

We do have a pintle hook that fits in a 2" hitch and will work with a lunette ring that has an inner diameter of more than 2-1/2", the Curt #C48004. I asked some colleagues and we weren't quite sure what you were referring to in terms…

Yes, it does. The Curt Front Mount Hitch item #C31086 is confirmed to fit the 2020 Jeep Gladiator. It fits all models except for the Mojave and Rubicon.

I took a look at your invoice and see that you purchased the Curt 2-5/16 inch Hitch Ball #C48830. If the trailer hitch ball mount you have has a 1-1/4 inch shank hole for the ball you can sure use this hitch ball. This hitch ball has a 16,000 lb…

The Buyers Products 15 Ton Pintle Hook part #337PH15 does have the 30,000 lb. GTW and the 6,000 lb VLL ratings you are requiring. If you want the same capacities but with a 2 6/16" ball then the Convert-A-Ball Pintle Hook Combo with 3 Stainless…

For the applications that we normally deal with we don't have a trailer hitch that has a 5,000 lb tongue weight capacity. The Pintle Hook part #C48004 does have a 5,000 lb tongue weight capacity though so if you have a heavy duty vehicle that was…

Pintle hitches are made to fit certain sized Lunette rings. The rings that we carry are only available in 2-1/2" or 3" diameter sizes. For example, the Curt Pintle Hook for 2" Hitches #C48004 fits lunette ring couplers with a minimum…

It sounds like you are looking for a hitch mounted pintle hook to use the lunette ring mounted on your military trailer. If that is the case then the Curt Pintle Hook part #C48004 is what I recommend. That said, there really isn't one that will…

The Curt Pintle Hook with 2" Hitch Ball - Bolt On - 10,000 lbs/16,000 lbs #C48190 is not made in the USA but are made to US specs and requirements. Curt trailer hitch receivers are made in the USA, but not all of their products are domestically…

The standard size lunette ring is 3 inches like the Demco Lunette Ring - Adjustable Channel Mount - 3" Diameter - Black - 25,000 lbs #DM09557-81. The 2-1/2 inch rings will not fit in the adjustable channel mounts where the vast majority of the 3…

Yes, the Curt Bolt-On Pintle Hook, Item #C48210, will work with a 3-inch lunette ring on a 10-ton trailer. It has a maximum weight capacity of 20,000-lbs and a maximum tongue weight capacity of 4,000-lbs. The mounting hardware is included, and it can…

Usually loops for the safety chains are on the hitch receiver because a pintle hitch like the Buyer's Products #33710045 you referenecd often connects to a mount the B&W #BWPMHD14003 which slides into a receiver. If this isn't how yours…

The Pro Series Adjustable Pintle Hook Mounting Plate for 2" Hitches - 14K lbs #63072 has a measurement from the front of the mounting plate to the center of the hitch pin hole of 9-11/16 inches. It sounds like you are wanting to know the backing…