Set up: Timbren Rear Suspension Enhancement System on a 2013 Ford F-250 and F-350 Super Duty Video

What year Ford F-350 do you have? I can help pick out the best suspension enhancement kit if I can get that from you.

I sure can! To replace the bearings in your 2023 Grand Design with Dexter 7,000 lbs axles you will need the following parts: Inner Bearing - Replacement Trailer Hub Bearing item #25580 Outer Bearing - Replacement Trailer Hub Bearing item #14125A…

Hi Ryan; you can place a block under the BTBRV Tongue Weight Scale #BTBRV44FR if you need to. Just make sure the block and scale are on level ground. You will also want to chock the wheels of your trailer to keep it stable.

Yes, it does. The Spacer Kit for Timbren Suspension item #T68MR will work with the Severe Service Timbren Suspension Enhancement System item #TFRTT350J. This system is confirmed to fit the 2023 Ford F-250. It already includes a pair of 1"…

In order to find the correct replacement brake pads/assemblies for your trailer you'll need to gather some information such as the axle capacity, brake type (disc/drum), and brake model. The axle capacity can be seen most times on the axle tag in…

Yes, you can still install the Timbren Springs #TFRTT350F on your 2013 Ford F-250 without the raised stop like you have seen in the images you found. I have included an image below which shows their other Kit #TFR250SDG for your F-250 on a truck…

It sounds like you may have a short in the wiring on your 2022 Ford F-350. You can use a Multimeter #PT29ZR to check this at your 7-way by checking for continuity with the brake wire and any other wire on the 7-way. You can see the terminals in the…

The difference in harshness between the Timbren kits part #TFR350SDF and #TFRTT350F would be very noticeable. Especially when unloaded. Your truck is already going to have a rough ride as that is the nature of 1 ton trucks but the 12k Timbren kit…

The Timbren Active Off-Road Bumpstops #TABSOSR referenced in your question feature an assembled height of 4-5/8 inches. I have attached a short video review on this kit along with the written installation instructions that you can check out as well.

There is not a plug and play adapter for your Lance connector that we are aware of. Typically this is installed by the Lance dealer. A junction box/7-way plug kit like #HS381-9000 is an option you have to convert the camper to match the 7-way RV…

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

There's a leak somewhere on the air lines or fittings of your air bag. What you'll need to do is go over all of the lines and fittings and see if you can find the leak and fix as needed. If the leak is on the line right at the fitting you can…