Trailer Wiring 4-way Recommendation 2013 Impreza WRX

Question

Question:

I was wondering if this would work with an Impreza WRX non-STI 2013 hatchback. I assume it would work since the platform is basically the same.

asked by: Mike

0

Expert Reply:

For a wiring kit for your 2013 Subaru WRX non-STI you would want the kit part # C59496 as this is the only harness confirmed to fit your vehicle.

The part # 118573 hasn't been confirmed to fit your vehicle so I can't recommend it for you.

expert reply by: Jameson C

0

Answer 1

We do offer custom-fit T-connector trailer wiring harnesses for the Subaru Impreza. All of these can be seen on the link provided. You can use the Select Vehicle Style drop-down menu to select your particular version of the Impreza. For example, the…

view full answer...

Answer 2

The Tekonsha Wiring Harness part #118573 is confirmed to fit your vehicle. This is a plug and play wiring kit kit that will require one circuit be ran from the converter box to the vehicle's positive battery terminal. We haven't had an…

view full answer...

Answer 3

For the 2012 Impreza Hatchback, the correct hitch would be the Curt #C11286. For WRX or WRX STi Hatchback models, the correct hitch would be #C11120. The #11317 you mention is a fit for the WRX Sedan model only. Of all the hitch manufacturers we deal…

view full answer...

Answer 4

There is a wiring option that would work, but you'd need to hardwire in a wiring harness like part #C59496. I spoke with my contacts at Tow Ready, and found that there isn't a plug-and-play option for the WRX STi Sedan model. They do offer a…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 8

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 11

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 12

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Trailer Wiring 4-way Recommendation 2013 Impreza WRX

Products Featured in This Question

Continue Researching