Can the Dutton Lainson StrongArm Winch part # DL24874 Use a Strap Instead of Cable

Question

Question:

When loading boat the cable rolled and kinked. I removed cable and replaced it with 20foot of 2inch marine grade strap. I attached directly on to winch roller by placing a small bolt through end of strap, put the bolt ends into the holes where the cable was, and winched it tightly. Is this the correct way to attach strap directly onto winch drive?

asked by: Gavin K

0

Expert Reply:

The Dutton Lainson StrongArm Winch part # DL24874 (also known as the SA12000), can have a strap or cable attached to it.

What you described is how you would replace the cable with a 2 inch strap for this winch.

expert reply by: Jameson C

0

Answer 1

The Dutton-Lainson StrongArm Electric Winch #DL25215 doesn't come with a mounting plate but you can use part #DL24055 or #DL24059 if your current mounting bracket doesn't match with the mounting hole pattern for this winch (see attached).

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 7

Hey Randy thanks for the information! Here are the parts you'll need to add a brake controller to your 2006 Dodge Ram 1500 with a factory 4-Way connector: Brake Controller and Custom Fit Wiring Harness - Curt TriFlex NEXT item #C43GV 7-Way…

view full answer...

Answer 8

Hey Ronnie! You want the upgraded equalizer to match the existing equalizer measurements so you don't throw off the suspension geometry. The Road Armor #LC53CK is only 6" long making it is a little too short for your setup. The MORryde Shock…

view full answer...

Answer 9

If your 2006 Dodge Ram 2500 already has the B&W Underbed Kit #BWGNRK1308-5W installed, then the B&W Companion #BWRVK3400-5W is definitely the best option for towing a fifth-wheel trailer. The Companions are considered by many to be the best…

view full answer...

Answer 10

Hey David, we have everything we need to flat tow your 2006 Dodge Ram 1500 4WD but the first thing you need is a base plate kit like the Blue Ox part #BX1988 which I like because in my experience the Blue Ox kits are just really well made and easier…

view full answer...

Answer 11

You sure do Greg! Which is why the MORryde X-Factor Crossmember for Standard Frame Hangers item #MR33WR comes with longer suspension bolts. These bolts will replace the ones currently being used on your trailer's spring hangers. The X-Factor…

view full answer...

Answer 12

Hey Kyle! What kind of camper do you have? There are camper tie-downs available for your 2006 Dodge Ram 3500 Dually. However, I will need to know what kind of hitch you have, along with running boards (none, cab length, wheel to wheel) to find the…

view full answer...

Can the Dutton Lainson StrongArm Winch part # DL24874 Use a Strap Instead of Cable

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching