Replacement Velcro Strips for a Tonneau Cover2003 Dodge Ram 1500

Question

Question:

I have access cover tonneau and Velcro measures1 1/4 . Would A60270 Velcro will be ok to use.

asked by: Bernie V

0

Expert Reply:

Yes, the replacement Velcro strip # A60270 (17x1 inches) will replace the Velcro strip on your tonneau cover with a Velcro strip measuring 1-1/4 inches wide. The replacement Velcro strips are made in 1 inch # A60270 and 1-1/2 inch # A30474 but not 1-1/4 inch.

I would go with the 1-1/2 inch Velcro strip # A30474 because it will have a proper hold.

I included a link showing you the Velcro strips we currently offer as well.

expert reply by: Chris B

0

Answer 1

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 2

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 3

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 4

I have an answer for you. Unfortunately, we do not carry Gator-brand tonneau covers, so we will not be able to confirm for sure if our replacement replacement Access Velcro strips will fit your tonneau. However, judging by your attached picture and…

view full answer...

Answer 5

Hi Randy; we don't have any replacement parts for an Ionic tonneau cover but you may be able to use the Replacement Velcro Strip for Access TonnoSport and Vanish Covers #A60270. This is the hook side, 1" wide by 17' long. However, this…

view full answer...

Answer 6

Hey Dan, thanks for the information! We've actually ran into this exact situation before with the Chevy tonneau covers. The Replacement TruXedo TruXport Shur-Bond Hook-And-Loop Fastener Strips for 6-1/2' Beds item #TX1117876 can be used…

view full answer...

Answer 7

To find replacement Velcro for your tonneau cover I would have to know what kind of tonneau cover you have. For example, the #A60270 you looked at is designed to fit Access TonnoSport and Vanish covers.

view full answer...

Answer 8

I'm going to need you to measure the width of the Velcro strip of your Access tonneau cover. If the width his 1-1/2 inch you'd need the part #A30474, if it's 1 inch you'd want the part #A60270, or 1-1/4 inch part #A20790.

view full answer...

Answer 9

The Replacement Adhesive Velcro Strip #A20790 is 16' long x 1-1/4" wide, and I believe that's what you were referring to by hook portion, and yes it is correct. We do not carry Lund tonneau covers or their replacement parts so while I…

view full answer...

Answer 10

The Replacement Velcro Strip for Access Tonneau Covers - 1-1/2" x 17' #A30474 is made for Access tonneau covers, but that it is not to say that it cannot be used on your Lund Rollup L96092. We do not carry any Lund tonneau covers or parts. I…

view full answer...

Replacement Velcro Strips for a Tonneau Cover2003 Dodge Ram 1500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching