Replacement Lynch Pin for a Fulton 2500 Jack

Question

Question:

I need lynch pin replacements, my pins measure 3-3 1/2 inch your part number states 2 - 2 1/2, is that the safety part measure, or the actual pin? I have 2500 lb Fulton jacks- See attached photo of my lynch pin -Thank you,

asked by: MAURER M

0

Expert Reply:

It looks like you need the part # BD500219. This lynch pin is 3-9/16" overall and has a diameter of .563. Check out the review video I attached as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Yes, the Drop Leg #LC405217 will fit your Lippert Electric Trailer Jack #LC285318 on your 2023 Grand Design Imagine XLS 22MLE travel trailer.

view full answer...

Answer 2

The Lippert Electric Trailer Jack #LC285318 that you referenced features an inner tube diameter of 2 inches. We do have a nice selection of jack feet that are compatible with this jack. The Husky Brute Super Foot Fold-Up Jack Foot #HT31610 will fit…

view full answer...

Answer 3

We have a drop leg that fits your Lippert powered a-frame jack with the #LC405217 but the part number you mentioned fits a different brand and would not work.

view full answer...

Answer 4

There is a drop leg made specifically for Lippert power jacks such as #LC285318. It is #LC405217.

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 10

Hi Donny; after looking at several videos of the trailer it does appear to have a 6 on 5-1/2 bolt pattern with ST225/75R15 tires. The Goodyear Endurance ST225/75R15 Radial Tire w/ 15" Eagle Aluminum Wheel #GY97QB will be a direct fit.

view full answer...

Answer 11

Hi Chris, that’s a great question and I’m glad you’re checking before loading that bike up. With the Roadmaster adapter part #RO24FR being rated at 400 lbs tongue weight, you’d be right at its limit with your bike and carrier, and once you factor in…

view full answer...

Answer 12

Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…

view full answer...

Replacement Lynch Pin for a Fulton 2500 Jack

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching