How to Determine Square Axle Trailer Capacity
Published 04/22/2015
Question:
My axles are square and 1.75 inches in each side. I have a tandem trailer So how much weight can each axle hold?
asked by: William
Expert Reply:
Square axle capacities are pretty hard to determine. Unlike round axles, they do not have set capacities based on their dimensions. But what you can do is give me some exact measurements of your spindle and we should be able to see if there is a hub we carry that would fit so that you could at least get a ballpark on your capacity. Bearing numbers would work as well.
Near the coupler of the trailer there should be a plate or sticker that would have the VIN. There should be capacities listed there.
I need the dimensions of where the bearings and seal ride.
You might be able to contact the original camper trailer company your trailer was built by to see what they say for axle capacities.
Product Page this Question was Asked From
Dexter Trailer Idler Hub Assembly for 6,000-lb Axles - 6 on 5-1/2
- Trailer Hubs and Drums
- Idler Hub
- Standard
- 25580 / 15123
- Standard Grade
- For 6000 lbs Axles
- 1/2 Inch Stud
- 6 on 5-1/2 Inch
- 16 Inch Wheel
- 16-1/2 Inch Wheel
- 17 Inch Wheel
- 17-1/2 Inch Wheel
- 18 Inch Wheel
- 18-1/2 Inch Wheel
- Dexter
more information >
Continue Researching
- Shop: Replacement U-Bolt with Nuts for 1-3/4" Wide, Square Trailer Axles - 9/16" Diameter
- Search Results: trailer axles
- Shop: Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles - 12" - 6 on 5-1/2 - Pre-Greased
- Q&A: Tips for Determining Square Trailer Axle Capacity
- Article: Trailer Tire Sizing
- Shop: Dexter U-Bolt Plate for 1-3/4" Round Axle - 1-3/4" Wide Springs - 3/8" Bolts
- Shop: CE Smith U-Bolt Kit for Mounting 2" Square Trailer Axles - 4-1/2" Long U-Bolts - Zinc
- Shop: U-Bolt Kit for Mounting 5,200-lb to 7,000-lb, Round Trailer Axles - 7-1/16" Long U-Bolts
- Shop: CE Smith U-Bolt Kit for Mounting 1-1/2" Square Trailer Axles - 3-3/8" Long U-Bolts - Zinc
- Shop: U-Bolt Plate for 1-3/4" Diameter Axle, 1-3/4" Wide Spring - 3/8" Bolts - Galvanized
- Search Results: trailer hubs and drums
- Search Results: wheel seal
- Search Results: tongue jack
- Search Results: 5200 lbs axle trailer brakes
- Search Results: swivel jacks trailer jack
- Q&A: How To Determine the Weight Capacity For a Trailer Axle
- Video: Review of etrailer Trailer Jack - Square Direct Weld Jack - e32ZV
- Search Results: trailer axle
- Video: Measuring To Choose The Right Trailer Axle
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
- Video: A Look at the Power Mountain Tallboy 6 Ton Off-Road Bottle Jack with a Military Cargo Trailer
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
on Trailer Hubs and Drums
