Hitch and Trailer Wiring Recommendation for a 2014 Ford Escape SE
Published 04/20/2015
Question:
So, is the design of the 2014 hitch completely different than for the 2013 Escape? The 2013 install shows the exhaust being ped down to install the hitch, the 2014 does not... is that correct? I like the look of the 2013 being way more hidden, but I don't know if the two years are interchangeable. Please explain. Also, using the Curt wiring kit, can the power be accessed in the rear of the car or does the leads have to go up to the battery? Let me know ASAP.
asked by: Evan
Expert Reply:
Some hitches have confirmed to fit both the 2013 and 2014 Ford Escapes.
The Curt hitch part # C13186 that you referenced will only fit the 2013 SE, SEL, and Titanium models so I would not recommend it for you.
The Draw-Tite part # 75758 will fit both the 2013 and 2014 models so I would recommend it for you. I attached an install video for you to check out as well. The installation instructions do not recommend lowering the exhaust.
You will have to run the power wire from the Curt Harness part # C56335 all the way up to the battery. This allows the harness to bypass the delicate taillight wiring of your Escape which would prevent damage in the event of a short. I attached a help article that covers this as well.
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- For Towing
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 5000 lbs WD GTW
- 2 Inch Hitch
- 500 lbs WD TW
- Concealed Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Q&A: Wiring Harness for 2014 Ford Escape
- Shop: Trailer Hitch
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Search Results: 4 flat mounting bracket
- Video: Curt T-Connector Vehicle Wiring Harness Installation - 2013 Ford Escape
- Video: Curt T-Connector Vehicle Wiring Harness Review C56040
- Q&A: Troubleshooting Trailer Wiring that Stopped Working on 2013 Ford Escape, Fuse is Good
- Q&A: Ball Mount that Fits 1-1/4 inch Hitch with 2 inch Hitch Ball
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt Mounting Bracket for 4-Pole Flat Trailer Connector
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Classic Accessories Stellex V-Hull Fishing Boat Cover - 12' - 14' Long - 68" Beam
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: The Low-Down on the Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: Trailer Wiring Diagrams
- Video: Curt Powered Tail Light Converter Installation - 2023 Kia Telluride
- Search Results: trailer wiring
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Video: Clean Up Your Trailer Wiring
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Installation Time for Blue Ox BX1128 Flat Tow Base Plate Kit for 2016 Jeep Grand Cherokee
on Trailer Hitch
