What Type of Hardware Should be Used to Attach E-Track to Plywood Trailer Walls
Updated 04/13/2015 | Published 04/10/2015 >
Question:
3/8inch plywood walls. What size screws would you use with thd e tracks? I have a 6x10 diamond cargo trailer and plan on putting 2 rows of the 5foot down each side. Mostly for my zero turn, but want to be prepared for other items.
asked by: Chris L
Expert Reply:
For plywood walls you would need wood screws to secure the E-track # E19148 to the walls. That is if you attach the track to only the wooden walls. If you secure any of the E-track to the metal support frames then you would need machine screws for the metal type used on the trailer.
The mounting holes in the E-tracks are 1/4 inch in diameter so using 3/16 inch hardware of the appropriate length would be the way to go.
Product Page this Question was Asked From
Erickson Horizontal E Track - Zinc Plated Steel - 2,000 lbs - 5' Long - Qty 1
- E Track
- E Track Rails
- Horizontal
- 5-1/8 Inch Wide
- 2000 lbs
- 5 Feet Long
- Erickson
more information >
Continue Researching
- Shop: Suspension Enhancement
- Shop: Timbren Suspension Enhancement System - Rear Axle
- Video: Review of the Timbren Suspension Enhancement System-T57CR
- Shop: SumoSprings Solo Custom Helper Springs - Rear Axle
- Shop: Air Lift LoadLifter 5000 Air Helper Springs - Rear Axle
- Q&A: E-Track Mounting Bolt Hole Skipping For Securing to a Wooden Trailer Floor
- Video: Firestone Ride-Rite Air Bags with Easy Mount Compressor Feature Breakdown
- Article: Trailer Wiring Diagrams
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer hitch
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: suspension enhancement
- Q&A: How to Replace a Lance 6-Pin Plug w/ a Standard 7-Way Connector
- Article: How to Measure for Trailer Hitch Drop
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Video: Choosing the Right Vehicle Suspension Upgrades
- Search Results: trailer wiring
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Shop: etrailer Anti-Rattle Hitch Collar for 2" Hitch Receivers
- Shop: Base Plate for Tow Bar
- Video: Pacbrake Alpha Air Bag Suspension Kit Review and Comparison
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Search Results: trailer jack
- Shop: Fifth Wheel Hitch

