2014 Dodge Ram Front Hitch Skid Plate Interference  

The install of the Curt Hitch #31374 and the Draw Tite hitch part #65062 on your 2015 Ram 1500 are going to be so similar that you really wouldn't gain much in terms of fascia trimming/modification if you went with one or the other. The Curt…

Curt has the front hitch part #31374 as a fit for your 2016 Ram 1500 Limited with no fit exclusions for if the vehicle has air ride suspension. The same goes for the Draw Tite #65062 that you mentioned. Since you want as hidden of a hitch as possible…

The distance from the bottom of the sub frame, which is the same as the top of that bracket, to the bottom of the receiver on the #31374 is 6-7/8".

The Curt Front Hitch #31374 that you referenced does fit your 2021 Ram 1500 Classic and would require you to remove the tow hooks.

Yes, the factory tow hooks of your 2018 Ram 1500 will need to be removed when installing the Curt Front Mount Trailer Hitch Receiver #31374.

The Detail K2 Avalanche Elite Snowplow part #K2AVAL8422ELT will work with a front mount trailer hitch that is between 9" to 18" from the ground to the bottom inside edge of the receiver tube according to Detail K2. The blade height is…

We do offer front-mount hitches for your 2016 Ram 1500 4x4, two that are shown on the linked page, but neither one is a no-drill installation. Both require drilling and some fascia trimming (to make room for the receiver tube) and removal of the tow…

As long as your 2015 Ram 1500 Big Horn is a 4x4 then the best option we have to help with front end sag due to the snow plow you have installed is the Timbren Front Suspension Enhancement System part #TDF15004B which is actually designed specifically…

I have included a picture that shows the measurements needed for a spindle, bearings, seals, faces, and hubs. The spindle measurements are labeled A through F. A is the spindle shaft diameter B is where the grease seal sits C is where the inner…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Thanks for reaching out, Scott! The Blue Ox Base Plate Kit #BLU74FR on our site is actually the same thing as the Blue Ox part number BX2418 and I like that removable pin style much more than the etrailer Classic Base Plate Kit #e98945 with the fixed…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.