What Does the Reese Fifth Wheel Hitch 30031 Fit

Question

Question:

Hi Etrailer, I have inherited a Reese 30031 fifth wheel hitch from my wifes uncle. Is there a list of pickups it fits somewhere or box types that I can determine what this unit fits. Thanks

asked by: Wayne T

0

Expert Reply:

The Reese part number 30031 is a fifth wheel hitch designed to basically fit any vehicle with a set of industry standard fifth wheel rails like what are in the picture I submitted. Most trucks can be fitted with a set of compatible fifth wheel rails like these.

expert reply by: Jameson C

0

click to enlarge

Answer 1

Hello Jamie, thanks for reaching out. Since your 2024 Ram 2500 is a short bed, I do recommend that you go with a sliding 5th wheel hitch. The slider is to help with clearance on tight turns or when backing up into a tight parkign spot. If your Ram…

view full answer...

Answer 2

Hi Dave; what kind of 5th wheel do you have? I'm assuming your 5th wheel hitch fits industry standard rails. If you want custom brackets then the #RP50142 you were looking at will fit your truck. You will also need the Reese Universal Base Rails…

view full answer...

Answer 3

The Reese hitch part 30031 that you referenced is designed to fit the industry standard fifth wheel rails like what come with the part #RP50140-58 that you referenced. The two would work well together.

view full answer...

Answer 4

Fifth wheel hitches like the Reese 5th Wheel Trailer Hitch w/ Square Tube Slider #RP30051 aren't specific fits so you could use it in any truck bed. The base rails are what are specific fits. To install the #RP30051 in the bed of your 2016 Ford…

view full answer...

Answer 5

The Reese 5th Wheel Hitch #RP30051 fits industry-standard above bed base rails so in order to use it in your 2015 Ford F-250 Super Duty with the factory rail kit you'll need the Reese rail adapter #RP30156. The adapter fits into the factory rail…

view full answer...

Answer 6

I may have a solution for you, however the Pro Series Replacement Handle Kit #58180 referenced in your question is not compatible with your Reese 5th Wheel Trailer Hitch w/ Square Tube Slider #RP30051. This replacement handle is designed specifically…

view full answer...

Answer 7

If your Reese 16k Sliding hitch like the #RP30051 is compatible with industry-standard above rails, the Curt Adapter Rails #C88KR is the correct adapter you need for your 2022 Chevy Silverado 3500 with OEM prep. The adapter fits your truck. I went…

view full answer...

Answer 8

Yes, the puck system used on the 2016-2019 Chevy/GMC trucks is different than the pucks used on the 2020 and newer trucks. So you would need a 5th wheel like the B&W Companion #BWRVK3710 for your 2020 GMC Sierra 3500 with an 8' Bed. If you…

view full answer...

Answer 9

Yes, the Adapter Rails for Curt 5th Wheel Hitch #C88KR will work with your 2024 GMC Sierra 2500 and your Reese 16K hitch.

view full answer...

Answer 10

The Reese universal installation kit #RP30035 will accept your 14K Reese 5th wheel trailer hitch. This kit does fit your 2002 Chevy Silverado unless it is a 1500HD long bed but we do not have a video on that particular truck. I have included a link…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

What Does the Reese Fifth Wheel Hitch 30031 Fit

Featured Help Information

Miscellaneous Media

Continue Researching