Vent Cover Replacement for a Lark Utility Trailer Availability
Updated 03/09/2015 | Published 03/08/2015
Products Featured in This Question
Question:
I have a lark utility trailer. My vent has broken over extreme hot and gold direct exposure. It measures and looks just like this one. Do you know if it will fit? I assume if it doesnt I can return the product for a refund, correct?
asked by: Vickie S
Expert Reply:
Most likely we have what you are looking for but you will need to first determine what vent you have on your trailer.
In order to determine the correct roof vent, measure where the vent opens. The standard trailer roof vent opening is roughly 14-1/4" x 14-1/4" and have roof vents that measure 14" x 14".
To pick the correct cover, you will also need to know the type of hinge you need.
There is a 3 point hinge, such as the one on the Camco # CAM40153; a 4 point hinge as seen on the Camco # CAM40154; or a rolled metal continuous hinge like on the Ventline # BVD0449-A03; and universal hinge as shown on the MaxxAir # MA00-335001.
Basically the easiest way to select the correct replacement cover is to remove the existing cover and match the hinge and lift bracket to the photos on our site along with the dimensions. A link to all of the replacement vent covers is provided to match up with your cover.
If it is not clear which hinge style that you have, the MaxxAir above is a Universal Replacement Lid.
In the event that you don't find a lid you like, I also included a link to our main page for our complete 14 x 14-inch vent assemblies. These are offered in manual or powered lift and with or without fans. If you install a complete new vent you'll need an installation kit, either # 344270KITW for a metal or coated metal roof or kit # CAM25013 for a rubberized roof..
Product Page this Question was Asked From
Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White
- RV Vents and Fans
- Replacement Lid
- Roof Vent
- Plastic
- White
- Ventline
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Video: Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents: The Breakdown
- Shop: Roof Vent Installation Kit - Sealant, Butyl Tape, Screws - White
- Shop: Vent Cover for Ventline Old Style Rounded Dome Trailer Roof Vents - White
- Q&A: How to Determine Which Trailer Roof Vent Cover will Fit a Trailer
- Shop: Replacement Footplate for etrailer and Ram 2-1/4" Jacks - 6-1/4" x 4-1/2" - 2,000 lbs
- Shop: Round A-Frame Trailer Jack - Topwind - 14-1/8" Lift - 3,000 lbs - Black
- Shop: Round A-Frame Trailer Jack - Topwind - 14-7/8" Lift - 3,000 lbs - Silver
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: trailer hitch
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer tires and wheels
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: How to Choose a Trailer Brake Controller
- Q&A: Comparing Kenda KR03, KR35, And KR53 Tires
- Shop: Power Mountain Tallboy Off-Road Bottle Jack - 8-1/2" to 37-3/4" Lift - 6 Tons
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: trailer wiring
- Shop: Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Video: Measuring To Choose The Right Trailer Axle
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Shop: Brake Controller
- Search Results: trailer jack
- Search Results: trailer lights
- Article: How to Measure for Trailer Hitch Drop
- Q&A: Best Suspension Upgrade for 33" Tandem Axles: Road Armor vs Dexter EZ Flex for Ember 22ETS
on RV Vents and Fans
