Installation Instructions for Teknonsha Voyager # 39510 Using Factory Wiring Adapter
Published 04/01/2010
Question:
I need the wiring diagram for M/N 9035 when wired to a 2000 Ford F150 with factory installed wire harness. Thank You.
asked by: Marty D
Expert Reply:
I do not have a wiring diagram available, but I can certainly assist you with that installation. If you are using the Factory Supplied Wiring Harness (NOT an aftermarket model) the brake controller would wire to the harness as follows:
The red wire on the harness connects to the black wire on the brake controller, the light green wire on the harness connects to the red wire on the controller, the white wire on the harness connects to the white wire on the controller and the blue wire on the harness attaches to the blue wire on the controller. Your factory harness might also have a brown wire. This wire is for an illumination circuit that the controller does not use. Tape off the end of this wire and tuck it up out of the way.
If you are using and aftermarket wiring harness like the Brake Controller Wiring Adapter, part # 3035-P, you'd simply plug one end into the controller, the other end into the connector under the dash of your truck.
For your convenience, I will also link you to a copy of the operation instructions for the Tekonsha Voyager Brake Controller. I'll also link you to an install video.
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector - 7' Long
- Video: Mount: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector on a 2021 Ram 2500
- Video: Set up: Curt 5th Wheel/Gooseneck Custom Wiring Harness w/ 7-Pole Connector on a 2017 Ram 2500
- Video: Curt 5th Wheel Wiring Harness Installation - 2014 Ford F-250 and F-350 Super Duty
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Shop: Brake Controller
- Video: Feature Breakdown: Jacketed 2 Wire (Brake Wire)
- Search Results: trailer brake controller
- Search Results: brake wire
- Shop: In-Line Circuit Breaker - 20 Amp - Perpendicular Mount Bracket
- Q&A: Can an Electric Brake Controller be Installed on a Semi Truck in Place of a Air over Electric Option
- Q&A: Troubleshooting Tekonsha Voyager Trailer Brake Controller by Running a Bench Test
- Q&A: Brake Controller Wiring Instructions for the Tekonsha Voyager # 39510
- Q&A: Can a Prodigy Brake Controller Be Installed in a Kenworth Dump Truck with Air Brakes
- Q&A: Troubleshooting Tekonsha Voyager Brake Controller # 39510 Installation on 1999 Ford F-250
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: Trailer Hitch
- Search Results: trailer hitch
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: trailer wiring
- Shop: Redarc Tow-Pro Liberty Brake Controller w/ Universal Wiring Harness - Dash Knob - Proportional
- Video: Redarc Tow-Pro Liberty Brake Controller Review RED24FR
- Search Results: trailer tires and wheels
- Shop: Suspension Enhancement
- Article: How to Measure for Trailer Hitch Drop
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
on Trailer Brake Controller
