Draw-Tite Max-Frame Trailer Hitch Receiver # 75420 Will Fit What Year of Dodge Ram Trucks

Question

Question:

can you tell me the year range for this item on a Dodge Ram 1500

asked by: Vickie

0

Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver, # 75420, was designed to fit the following Dodge Ram trucks:

2003 (BUILT AFTER 11/1/02) - 2008 Dodge Ram Pickup 1500 Series, without factory hitch

2003 - 2009 Dodge Ram Pickup 2500 and 3500 Series, without factory hitch

expert reply by: Leah S

0

Answer 1

The Draw-Tite Ultra Frame Trailer Hitch Receiver - Custom Fit - Class IV - 2" #41929 will sit 9 inches from the bottom of the vehicle frame rails to the top of the receiver tube. This will work well with the ranch hand bumper you have and…

view full answer...

Answer 2

When comparing the Draw-Tite Ultra Frame Trailer Hitch Receiver - Class IV, part #41929, to the Curt Trailer Hitch Receiver - Class IV, part #14361, they are similar, but the new version of the Draw-Tite #41929 is rated higher. The Draw-Tite Class IV…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 7

Hi David! There are quite a few hitches offered for your 2026 Honda Odyssey, so I definitely understand wanting to know the differences. There are basically three styles available for you and I have them broken out below: Exposed Crosstube: etrailer…

view full answer...

Answer 8

Hey Ricardo! Yes, the Curt Trailer Hitch Receiver #C82RJ is the hitch Curt is working on for the new 2027 Telluride. This is a pre-order since Curt hasn't finished the design. It does not include wiring. The wiring harness for the 2027 is also up…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 11

You are going to need to replace your 2 inch trailer hitch on your 2008 Dodge Ram 3500 with one with a 2-1/2 inch opening so that you can use your 40 inch hitch extender. For that you would want the Curt hitch part #C15809 which is a confirmed fit…

view full answer...

Answer 12

Hey Amanda, the Tow-Pro Link #RED57AR includes SwayStop Plus, which lets you manually activate the trailer brakes using the remote or app if sway starts. When pressed, it applies trailer braking independently of your vehicle brakes to help straighten…

view full answer...

Draw-Tite Max-Frame Trailer Hitch Receiver # 75420 Will Fit What Year of Dodge Ram Trucks

Continue Researching