Add a tie-down point to a truck or trailer with a Snap-Loc E track anchor. Made of 3.5-mm steel, the low-profile tie-down anchor is unfinished and ready for custom paint colors. Bolt on wherever you need a strap-down point. Hardware sold separately.
Features:
Specs:
Great for contractors, movers, motorcyclists and anyone who tows. The Snap-Loc bolt-on anchor lets you install a permanent tie-down point wherever you need it, so you can securely strap down your equipment or supplies. Just bolt the anchor onto any smooth surface in your trailer, truck or garage, and it's ready whenever you need to tie down a load. Put the anchor on your trailer floor and you can strap pallets directly to it, or attach an anchor to your trailer wall to provide a strap-down point. Mount the Snap-Loc anchor to the ceiling so you can secure ladders or other long loads above the cargo that's on the floor.
Snap-Loc anchors have a square-hole design that allows for easy one-person installation using Snap-Loc carriage bolt hardware (sold separately). There's no need for another person to hold the bolt to keep it from spinning as you install the nut. The square-shaped underside of the carriage bolt fits snugly into the square hole of the Snap-Loc, which prevents the bolt from turning. This makes it much easier to install in a trailer wall or floor.
E Track accessories, such as cargo straps (sold separately), snap securely into the anchor slot using a spring-loaded mechanism. Just pull back on the E Track attachment's lever, put the end into the slot, and then release the lever.
Use the anchor with a Snap-Loc Loc-Ring (sold separately) to tie down equipment or large loads, secure your camping supplies, or trailer a motorcycle.
The Snap-Loc has a low profile, so it fits in places that other anchors don't - even on the side of your open tailgate. You can still close your tailgate as usual with the anchor installed. The streamlined fit also keeps the anchor out of your way when it's not in use. And if you need a recessed tie-down point, this single E Track anchor can be installed upside down - your E Track accessories will still lock into it securely.
The single-slot anchor also gives you a cleaner look for a more economical price than heavier 2' or 6' long E Track sections. Made of 3.5-mm steel, this low-profile tie-down anchor is unfinished and ready for your custom paint color. Bolt on wherever you need a strap-down point.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at the Snap-Loc E-Track style anchors. They're available in 4 different styles. This is our stainless steel version. That's part #SLSS. We have a zinc plated metal version. This is part #SLSZ.
We have an unfinished metal version. This is part #SLSU. And there is even a weld-on application available, part #SLSW. These anchor points are going to provide a great solution for our cargo management issues. As you can see any E-Track accessory is going to clip right into there giving us a good, secure anchor point for whatever it is that we need to store.
This is just a simple ring connection point. They've got straps. They've got bars that can run across. So, it's just a really good solution. These can be mounted just about anywhere as long as you get a good sturdy surface to screw it into or drill a hole, put a carriage bolt ...
these are square holes so you can but a carriage bolt right through there and bolt it right onto your trailer. As we said, there's a weld on application. It can be welded right onto the trailer or wherever else you want it during production and painted right over to match your finish. Again, the E-Track style, you just pull that lever toward you. Slide it up and then as you slide it down, that lever is going to click into position and it's going to hold that in place, no matter what.
I really like that for the straps because once the strap is in there, you don't have to worry about it coming unhooked. It's going to hold it's position until you can get over and make your other connection. You see we've got a connection made here on our 2 outside anchor points. We're just going to be securing a set of ramps here. Place them right into position. Then, it's just a matter of bringing one of our straps out. We can make our connection and snug it up. It's really all there is to it. This gives us a nice secure connection point that we'll not have to worry about. Again, available in 4 different styles. The "SLSS" is a stainless steel. The "SLSZ" is the zinc plated. The unfinished version, the "SLSU". And even the weld on application part #SLSW. .
Do you have a question about this E Track?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.