Availability Of 2" Long 1/2" Wheel Stud With 0.56" Spline
Updated 09/29/2025 | Published 09/06/2025
Products Featured in This Question
Question:
I am trying to find wheel stud bolts for a 2003 Champion boat trailer. they are 1/2 and are 2 + in length the splines are .56
asked by: John L
Expert Reply:
Hello John, thanks for reaching out. We do carry some 2" long 1/2" wheel studs, but I am sorry to say we do not have anything with a 0.56" spline diameter. What we have has either a 0.54" spline like part # DE52GR, or a 0.61" spline like part # 7-122. We do not have anything with a spline diameter that measures exactly 0.56".
Were you looking for a 0.56" spline diameter? Or was that the length of the spline? If so, what diameter are yours?
If we don't have a stud to match, the next step would be to look at replacing the hub. Let me know if that is something you want to look into.
Product Page this Question was Asked From
Trailer Hub Wheel Stud, Drive-In, 1/2" x 2.24" - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Drive-In Stud
- 2-1/4 Inch Long
- Redline
more information >
Continue Researching
- Search Results: magnetic trailer lights
- Search Results: remote trailer lights
- Search Results: fulton coupler parts
- Search Results: bulldog coupler parts
- Search Results: hasp
- Search Results: tekonsha trailer brake controller
- Search Results: hm38134
- Shop: Trailer Wiring
- Shop: TowSmart 4-Way Flat to 4-Way Flat Trailer Wiring Harness Extension Kit - 18" Long
- Shop: Step Bolt For Double Eye Springs - 9/16" Diameter - Plain - 3" Long
- Shop: Erickson E Track Tie Down Ring - 1,333 lbs
- Shop: Curt Class III Ball Mount with 2" Ball - 4" Drop - 2" Rise - 7,500 lbs
- Shop: Bearing Buddy Bearing Protectors - Model 1980A w/ Auto Check - Chrome Plated (Pair)
- Shop: Replacement Cables for Conventional Ramp Door Spring - 150" Long - Qty 2
- Shop: MaxxAir MaxxFan Rooftop Vent w/ Pivoting Fan - 4 Speed - Manual Lift - Smoke Lid
- Video: SoftStartUp Plug-In Soft Start for RVs - SSR64FR Review
- Video: Feature Review Dexter Bronze Bushings
- Video: Complete Breakdown of the Bronze Bushing
- Video: Installation Guide for the Dexter Bronze Bushings on a 2022 Grand Design Imagine Travel Trailer
- Video: A Closer Look at the Bronze Bushing
- Q&A: Replacement Bronze Bushings for Equa-Flex Cushioned Equalizers
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Trailer Suspension Parts Needed to Increase Trailer Capacity from 7000 to 10000 lbs Gross Weight
- Q&A: Why Are Shackle Straps Hitting Frame When Re-Building Trailer Suspension
- Q&A: Are Leaf Spring Bushings Hard to Replace
- Q&A: How to Determine Hanger Spacing for Tandem Axle Trailer Suspension with 26 Inch Springs
- Q&A: Should Shackles Always Angle Upwards And How To Correct If The Angle Is Off
- Q&A: Replacement Wheel Stud that is .545 Diameter and 1/2 - 20
- Shop: Vehicle Engine Heaters
- Video: The Low-Down on the Easy Grease Trailer Hub and Drum Assembly for 5.2K & 6K Axles
Jesse M.
9/29/2025
Hey John, did you find a solution for your wheel stud issue? I'm curious to know if you ended up replacing the hub or found another way to match the 0.56 spline diameter. Your experience could really help others facing a similar challenge.