etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
This item does not fit your vehicle
2024 Nissan Rogue
These items fit your vehicle
2024 Nissan Rogue
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.
Features:
Specs:
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
Installed on 2025 Jeep Wrangler 4DR. Install took under 15 minutes by myself. On our Jeep there was nothing to remove, and there was plenty of clearance around the muffler, so it did not have to be lowered. Simply hold it up, put the bolts in, and tighten it up. Flat black paint blends nice with matte bumper.
etrailer Trailer Hitch Receiver is extremely well made and heavy duty. All the holes line up and the bolts are just the right size.
It's a great looking hitch and I would highly recommend this one for your Jeep.
So far so good! Works well, and so far hasn't shown any signs of rusting. It's tight ( which is a good thing) , and I had to ground off a bit of weld slag off the Jeep frame for fitment. ( not the hitches' fault). -1 star for not having any way to attach ( or even hang) the wiring harness..
Very stout feeling. Install was a bit difficult, the muffler and one of the bolts were fighting for space to run the bolt through the frame. The instructions say to move the muffler, but I was able find enough give with some forceful persuasion to finally get the bolt through.
Wanted the 5k hitch for my 2018 Jeep JLU Sahara. Bolted on with little fanfare and was able to pull a 3k lbs cargo trailer. I probably won't pull the full 5k but having excess capacity is never a bad thing.
Gwendolyn Y.
4/1/2025
Hopefully the fanfare was followed up with a high-five for a job well-done :D
Exact fit. Took about 30 minutes to put it on. Did not have to remove exhaust like someone mentioned. There was an existing bracket that the hitch needed to be wedged between the frame and the bracket but no big deal.
Easy install, but I would add, in the instruction video, that sometimes you might need to take an angle grinder or oscillating tool to shave off excess weld to get this hitch to fit. Otherwise easy plug and play.
Great product. Nice Quality. Simple Bolt on and Torque Installation. As advertised. No Modifications needed. Did not have to drop the muffler. Could not have been easier. 30 Minutes start to finish.
Fits perfect. There are two bolts in the frame that get used instead of the new bolts. Use two new bolts that come with the receiver and two existing bolts. Fast install in 20 mins with one person.
Amazing Quality
Victoria H.
3/1/2025
It looks good Chad! What are you towing?
Excellent product, poor installation instructions. I have included the photo of the part that had to be removed before I could install the hitch - despite emailing prior to purchase to ensure an exact fit, there was no instruction to remove that part. Once that part was removed, fit was perfect. No need to temporarily remove exhaust, despite recommendation in directions. The vehicle is brand new, Rubicon 4xe. I will only use the hitch for a bike or luggage carrier, but it is heavy duty and would handle more that the Jeeps towing capacity
Jenny N.
3/3/2022
I researched and found that there is install note that needs to be added to the manual. Some models may have existing bolts attaching a plate with weldnuts on it. The hitch will need to be slid inbetween the bracket and the mounting tube witht he factory hardware reinstalled, securing the hitch.
Thomas M. 
2/24/2023
Product is working great - heavy duty enough to tow a 3,500 pound little camper. Towing limitation is the Jeep, not the hitch!
I think that you should NOT have to redrill the holes to make it fit a jeep wrangler. That is what it is made for. The directions say some drilling maybe required. Let me drill the holes bigger, stop go buy a big ass bit and then repaint it so it won't rust then install, seems fair?
I had my hitch receiver installed in 25 minutes with just two wrenches, I didn’t have one issue installing it on my 2025 Jeep Wrangler Sport. I like the Matte Finish.
I watched your install video and then installed the hitch. It was pretty much just like the video. All the bolts lined up perfect! Didn’t even need to take little plate off, just pushed it back a little and slid the hitch in place. Easy -Peasy.
That’s why I bought the E-trailer hitch, I wanted it to fit.
I needed a hitch receiver that would fit my 2018 Jeep Wrangler JK and extend far enough that I could use by Kuat Sherpa 2.0 platform bike rack and clear the spare tire. This hitch worked perfectly and was an easy install.
Roger
10/12/2020
Exactly what I needed. I have used on many times and could not be more pleased with the hitch
The receiver fits Perfectly and the finish looks factory-installed. I do have one piece of advice. My 2024 Jeep Wrangler did have two bolts that held a bracket in place. This bracket also anchors the middle part of the rear bumper cover. If you loosen the 2 10mm bolts (do not remove) on the bumper cover and then remove the two 18 mm factory bolts, the bracket (they refer to it as a plate in the installation video) will easily slide outwards making ample room to install the receiver. You will need to re-use the two factory bolts as the plate has built-in nuts. Installation took less than an hour. Great Product!
Everything appears to be well made and surprisingly all 4 bolts were grade 8. Doesn't get better then that either.
Linda
8/11/2025
Very well, still like new and tows a 5000 trailer with ease.
Great product! Delivery was fast, installation was easy and I highly recommend!
Works great! Color match is perfect to Jeep Wrangler 4XE.
Great fit on our 2023 Wrangler Rubicon. I was able to perform the install without removing the exhaust like stated in the instructions.
Dallas
2/9/2025
Still working great. Use it to pull our two place jet ski trailer. No issues and paint is still holding up well.
Robin H.
2/9/2025
Product quality is what I expected.. I thought I was purchasing the extended version of this receiver, so my bike rack would fit...
The hitch is very nice. but the holes in the back plate (the one closest to the muffler) are cut about 1/16 of an inch too low. This makes it VERY difficult to get the bolts in without either taking the muffler off or taking the 3 bolts it took me WAY too long to get in, out, then taking the hitch to my drill press and modifying the holes. I have a 2024 4xe, just like the one in the installation video. If anything the holes should be a little on the higher side to allow for the angle you have to use to put them in without taking the muffler off. I wasted about 3 hours today trying to get this installed. Your factory should have the holes put in the right place. I can feel where they are too low and the hitch is right up tight to the frame of the Jeep. I would not buy this hitch again.
It was fairly easy to install and aligned with the existing holes on my 2024 Jeep Wrangler Sport S. It did require my grandson to pull on the bumper to allow room between the bumper weld plate and the frame while I squeezed the hitch in the gap. The existing bolts on the Jeep were 18mm and the supplied bolts were 3/4". I recommend they supply 18mm nuts & bolts in the future so it doesn't require both standard & metric tools to install — otherwise, it was a straightforward hourlong installation.
Once I figured out the alignment of the bolts it was simple. The 2018 JL has two bolts and a bracket that are already there. U loosen, slide the hitch between the bracket. I reused the 2 stock bolts and used the 2 new bolts. Looks great! Total time for install about 40 mins with torque n the bolts. Havent used it yet but will let u know if there are any issues.
Victoria B.
8/14/2019
Some models will have existing hardware and a spacer installed in the hitch installation location. If your Jeep has these parts, you will want to remove the bolts and spacer, keeping the bolts for re-installation with the trailer hitch.
I read the reviews paying close attention to the fact that I had a Jeep Wrangler with the tire on the rear. I chose this one because it said it would fit and allow bike racks with the tire in place. Item arrived and I easily installed it with no effort at all. Nothing had to be removed unlike the instructions. The picture below is minutes after installation. My Thule 4-bike rack would not slide into place as it was not long enough of a mount which is contrary to what the description said. I reached out to etrailer and was told that I could purchase an extender for $XX dollars more than what I bought the mount for. I contacted a local trailer supply store that had an extender for a lot less money and now it works......
Do you have a question about this Trailer Hitch?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Greg
7/10/2025
After a year of towing, the etrailer Trailer Hitch Receiver still looks new and working well