bing tracking image
  1. Trailer Jack
  2. etrailer
  3. Boat Trailer
  4. Utility Trailer
  5. 1001 - 2000 lbs
  6. Manual Jack
etrailer Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 10-3/8" Lift - Zinc - 1.5K
etrailer

etrailer Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 10-3/8" Lift - Zinc - 1.5K

Part Number: MJ-1500B-DWL
In Stock
$78.30
Trailer Jack
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion. Great Prices for the best trailer jack from etrailer. etrailer Boat Trailer Jack w/ 2 Wheels - Sidewind - Swivel - 10-3/8" Lift - Zinc - 1.5K part number MJ-1500B-DWL can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (997)
  • Q & A (0)
  • Photos

etrailer Trailer Jack - MJ-1500B-DWL

  • Boat Trailer
  • Utility Trailer
  • 1001 - 2000 lbs
  • Manual Jack
  • Bolt-On
  • Side-Mount Jacks
  • Swivel Jacks
  • With Wheel
  • 11 Inch Lift
  • etrailer
  • Marine Grade

Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.


Features:

  • Supports, lifts, and lowers your boat or recreational trailer
  • Offers twice the stability of single-wheel jacks
    • Wheelbase turns a full 360 degrees
  • Swings up and down smoothly
    • J-bolt handle lets you position jack quickly
  • Resists rust and corrosion with clear zinc finish
  • Avoids winch posts, tool boxes, or other accessories mounted on your trailer
    • Sidewind handle lets you crank jack without your hand getting smashed
  • Bolts around trailer frame
    • Includes mounting bracket and hardware


Specs:

  • Application: trailer frames 2" to 4" tall
  • Lift capacity: 1,500 lbs
  • Bracket height:
    • Retracted: 12-5/8"
    • Extended: 23"
  • Screw travel : 10-3/8"
  • Handle radius: 6-1/2"
  • Inner tube diameter: 2"
  • Outer tube diameter: 2-1/4"
  • Dual-wheel dimensions: 5-3/4" diameter x 4" wide
  • 1-Year warranty


Dims Bracket

How to Determine the Lift Capacity You Need in a Jack

A trailer jack lifts your trailer high enough at the tongue to allow you to couple it with your vehicle. Usually, your tongue weight is about 10-15% of your gross trailer weight (GTW). For example, a 10,000-lb trailer has a tongue weight of 1,000 lbs to 1,500 lbs. To raise the tongue of a trailer this size, you'd need a jack that can handle a static load of no less than 1,500 lbs. And, yes, it's okay to have a jack with a weight rating that is higher than your trailer's tongue weight. In fact, a jack with a higher capacity should operate more efficiently, allowing you to spend less time cranking and more time fishing.



MJ-1500B-DWL etrailer by Ram Round Swivel Marine Jack - 2 Wheel - Bolt On - Zinc - Side Wind - 10-3/8" Travel - 1,500 lbs

Similar to FXPD15L and FXP10 Fulton Boat Trailer Jacks (Except Bolts onto 2" x 4" Frames)





Customer Satisfaction Score:

Ratings & Reviews

4.8

996 reviews
Get more traction and stability on uneven ground than with 1-wheeled jacks. Dual wheelbase swivels 360 degrees for maximum maneuverability. Marine-grade zinc resists rust and corrosion.

by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:



by:


25
996
Show More Reviews

See what our Experts say about this etrailer Trailer Jack

  • Recommended EZ-Lube Spindle for a Carry-On 5' x 8' SP Series Trailer
    Hey Steve, thanks for the information. I tripled checked this but for whatever reason, Carry-On put a 2,000 lbs E-Z Lube axle pn 2K7158EZ on your 5' x 8' SP Series trailer and then decided to put spindles on it (pn 151T) that are not EZ-Lube. I looked at quite a few pictures of the 151T spindle online and they do not have the hole in the rear of the spindle or on the side where the hub sits that allows the grease to travel through. If you look at the pictures for the BTR E-Z Lube Spindle...
    view full answer...
  • Recommended Side Mount Trailer Jack for a Pontoon Boat Trailer
    Hey Bruce! I'm not too sure what you're looking for, but I see that you were looking at trailer jack's so I'll assume that's what you're referring to. If this is the case, the etrailer Boat Trailer Jack w/ 2 Wheels # MJ-1500B-DWL would be a great choice! This jack is will fit frames 2" to 4" wide, has a 1.5k lift capacity, and is a bolt-on side mount, with a sidewind operation. If it was something different you were referring to, please let me know in the comments and I'd be happy to help!
    view full answer...
  • Availability Of Dimensions For etrailer Boat Trailer Jack MJ-1500B-DWL
    Hello Scott, thanks for reaching out. I can provide dimensions for the etrailer Boat Trailer Jack # MJ-1500B-DWL but I am sorry to say we do not have a CAD drawing we can share. I will provide what dimensions we do have. Application: trailer frames 2" to 4" tall Lift capacity: 1,500 lbs Bracket height: Retracted: 12-5/8" Extended: 23" Screw travel : 10-3/8" Handle radius: 6-1/2" Inner tube diameter: 2" Outer tube diameter: 2-1/4" Dual-wheel dimensions: 5-3/4" diameter x 4" wide Is there...
    view full answer...
  • Will Boat Trailer Jack MJ-1500B-DWL Fit 2" x 2" Frame
    Hey Bob, Yes the etrailer Boat Trailer Jack w/ 2 Wheels # MJ-1500B-DWL will most certainly fit your 2" x 2" trailer frame without wobbling around. It fits frames up to 2" tall and you can tighten the clamps to the point you're going to get a nice, snug fit.
    view full answer...
  • Trailer Jack Replacement for a Dalton Bolt-On 1.5K Swivel Jack
    Hey Tyson, thanks for reaching out! I recommend checking out the 1.5K etrailer Boat Trailer Jack w/ 2 Wheels # MJ-1500B-DWL which measures 12-5/8" from the center of the mounting bracket to the bottom of the wheels when retracted and 23" from those same spots when extended. I know you only measured the jack itself, but when looking for a replacement jack, you want to compare the amount of lift and height you get as opposed to the exact dimensions when it comes to the body of the jack. Let...
    view full answer...
  • Using Trailer Jacks To Transport A Yakups Kayak Carrier
    Thank you for the picture. That kayak carrying device certainly does look cumbersome. Quite the interesting contraption. While generally we do not recommend modifying products like this, but I am happy to help if I can. With the bar being only 1" thick, the bolt on brackets we sell are not going to be sized correctly. I do agree that having it welded would be your best option. I would like to think that this crossmember piece will be strong enough to hold up the weight of the carrier...
    view full answer...
    Image 1 for Image 2 for
  • Recommended Replacement for Shelby 1,000 Lb Boat Trailer Jack
    If the trailer is heavy, or the ground is uneven, it will be hard to move regardless of which jack you use but if the bearings are wearing out in the old one then a new one would surely take some strain off the user when moving. I recommend a dual wheel jack for increased stability, the Round Swivel Marine Jack w/ Dual Wheel part # MJ-1500B-DWL which can simply be bolted to the frame once the old jack bracket is cut off. It has a zinc coating so it will be great for marine applications....
    view full answer...
    Image 1 for
  • Where is the etrailer Swivel Jack # MJ-1500B-DWL Manufactured?
    While we do have some great U.S.A.-made boat trailer jacks, the etrailer Round Swivel Marine Jack # MJ-1500B-DWL is manufactured in China. However, for a super close U.S.A.-made model, I recommend the Dutton-Lainson Swivel Marine Jack # DL67MR. This jack comes with the same 1,500 pound weight capacity and a similar bracket heights of 13" (retracted) and 23" (extended). As far as compatibility, the jack fits trailer tongue heights up to 24-3/4" inches tall and square trailer tongues up...
    view full answer...
  • Trailer Jack with Wheels to Make it Easier to Move Around a Trailer by Hand
    Standard trailer jack wheels are either plastic or metal so there isn't a rubber tire available. But we do have the Trailer Valet # STC-V211 which is both a jack and a trailer mover rated up to 500 pounds tongue. You may also be able to use mount # DL22144 which holds a spare tire but can also use that spare tire to make it a dolly. The only problem would be turning since this is a fixed position carrier. Another option is to use a different jack that has dual wheels. That would make...
    view full answer...
  • Who Manufactures etrailer Round/Wheeled Swivel Jack
    The # MJ-1500B-DWL is made in China. If you're looking for a USA made alternative I recommend the Dutton-Lainson # DL22580. This has a 12" lift, the same 1,500 lb capacity, and dual wheels. It uses a bolt-on installation and fits square tongues up to 3" x 5".
    view full answer...
  • Ramp to Load a Motorcycle Up on a Decked Pickup Bed
    Hey, Phil. If you want something that is best for your motorcycle, you're going to want to go with the Caliber MX Pro MotoCross Loading Ramp part # CA44KJ. The top of the ramp has Calibers integrated LowPro GripGlides that will help keep the tires of your motorcycle centered on the ramp when loading and unloading and rated for 3,000 lbs. This is one of our longest truck bed ramps at 89". We do carry a longer ramp like Gen-Y part # GY77WR that is 96" long. This ramp doesn't have any sort...
    view full answer...
  • 1995 Freedom Wheels Cobalt 220 Runabout Replacement Trailer Jack Recommendation
    Thank you for the photos! While it doesn't look like we have anything that mounts directly to your current mounting bracket, we do have some bolt-on replacement swivel jacks that will work perfectly for your application. For a single wheel replacement I recommend the Round Swivel Marine Jack w/ Wheel # MJ-1200B with 11" of travel and a 1,200 lb weight capacity, or for a dual wheel jack (for easy maneuverability) we have the Round Swivel Marine Jack w/ Dual Wheel # MJ-1500B-DWL which has...
    view full answer...
    Image 1 for Image 2 for Image 3 for Image 4 for
  • Rebuild Kit for the RAM Round Swivel Marine Jack Part # MJ-1500B-DWL
    It sounds like you have the Round Swivel Marine Jack part # MJ-1500B-DWL which is the only 1,500 lb dual wheel, round trailer jack that I am aware of. If this is the case then you will want to use the Replacement Sidewind Handle part # MJ-1000B-HD and the Replacement Gear Kit for etrailer and Ram Round Swivel Marine Jacks part # MJ-1000B-GR. I have attached a rebuild video for you as well.
    view full answer...
  • Recommended Replacement Boat Trailer Jack
    Thank you for the pictures, I went through all of the jacks that we currently offer to find a matching bolt pattern and unfortunately was not able to find one with a 5-1/2" x 3" pattern. Looking at the pictures the bolt holes do look threaded but there's not enough space between the bracket and frame to add on a nut to fully secure the jack anyway. In my opinion the best solution here would be to angle grind the welds of the old bracket and remove it. You can then paint any exposed metal...
    view full answer...
  • Dimensions and Diameter of the etrailer Round Swivel Marine Jack
    The etrailer Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K item # MJ-1500B-DWL you were looking at has an inner tube diameter of 2". The outer tube diameter is 2-1/4". I have linked an installation and review video. I have also linked a diagram with other dimensions.
    view full answer...
    Image 1 for
  • Recommended Trailer Jack with Lower Retracted Height for Landscaping Trailer
    I looked through our selection trying to find a similar jack to the MaxxTow MT70149 with a retracted height less than 14-3/4 inches and found a couple of good options for you. You didn't say exactly what height you need, however part # MJ-1200B has a retracted height of 12-1/2 inches. The weight capacity is slightly less, at 1,200 pounds but that's probably still plenty for your trailer. It also offers 11 inches of travel which is a 1/2 inch less than the MaxxTow. A second option is...
    view full answer...
  • Can I Use the Round Swivel Marine Jack on a Yakima Rack and Roll Trailer
    Yes. The Round Swivel Marine Jack w/ Dual Wheel - Bolt On - Zinc - Sidewind - 10-3/8" Travel - 1.5K Item # MJ-1500B-DWL will fit on trailer frames between 2" and 4" tall, so it will work on the 2" tall tongue of the Yakima Rack and Roll Trailer # Y08106. I've linked a short review video of the jack for you to have a look at.
    view full answer...
  • Replacement For Handle "Bushing" on Etrailer Marine Jack
    For the etrailer # MJ-1500B-DWL Marine Trailer Jack, if the "bushing" you are referring to is a small fitting that has a 1/2" round hole on the inside and is square shaped on the outside to fit in the square hole in the jack tube, then you can use the Fulton # F0933301S00 Replacement Handle Kit which includes that part. That part is not available seperately. If you additionally need the replacement cap on top of the jack you can order the etrailer # MJ-1500B-CP cap. Annually you should...
    view full answer...
  • How To Keep The etrailer Boat Trailer Jack MJ-1500B-DWL from Rusting
    Hello Brooks. The etrailer Boat Trailer Jack # MJ-1500B-DWL does not have a zerk fitting for adding grease. The best way to keep rust at bay is to keep the jack clean and dry. Rinse it with fresh water after dunking it in the salt, and do your best to get it dry and keep it dry when in storage.
    view full answer...
  • Looking For Dual Wheel Jack With Low Retracted Height
    Hello Molly. As far as the dual wheel trailer jacks go, out best option for low retracted height is the Ark Xtreme Off-Road Swivel Trailer Jack # ORJW350D. This has a very sturdy dual wheel setup and the retracted height is only 9-1/2". The Ark jacks are super solid and easy to maneuver. Just Keep in mind that this jack has a lift capacity of 770 lbs so you will want to be sure that your trailer does not exceed this rating.
    view full answer...
  • What Are the Dimensions of the Round Swivel Marine Jack with Dual Wheel
    The Round Swivel Marine Jack # MJ-1500B-DWL is roughly 25" total in length with the jack fully retracted. I've linked a diagram that shows the other important measurements that you might be interested in, as well.
    view full answer...
    Image 1 for
  • Marine Grade Swivel Jack Certification
    There are currently no established standards for marine jacks like # MJ-1500B-DWL in the US. Europe does have the "CE" standard, but our jacks have not gone through that process. With that being said, we do fully test our jack design to insure that they meet (and in most cases) exceed the ratings that we assign to them. We also do periodic random testing from our production to ensure quality and meeting of the capacity limits. The Round Swivel Marine Jack w/ Dual Wheel # MJ-1500B-DWL...
    view full answer...
  • Trailer Jack and Winch for 3,000 Pounds or Less Boat Trailer
    Since a jack doesn't need to hold the weight of the entire trailer it's pretty easy to get one rated for more than what you need. the 1,500 pound bolt-on swivel jack # MJ-1500B-DWL or 2,000 pound weld-on # TJP-2002S-B will be enough and are both great options. It's the same for a winch as well. The winch doesn't need to support the entire weight of the boat but needs to be strong though to pull it along your rollers. Being that you have rollers that will make it easier on the winch...
    view full answer...
  • Will the Fulton F2 Trailer Jack # F1413040134 Fit a Trailer With a 2 x 4 Frame
    I do have a solution for you, but since the mounting brackets for the Fulton F2 # F1413040134 have specific bolt holes it won't be compatible with your 2" x 4" frame. Instead, I recommend going with our Round Swivel Marine Jack # MJ-1500B-DWL which offers up to 10-3/8" of travel and is rated for 1,500 lbs. This jack is compatible with trailers that have a frame height ranging from 2" - 4" as you can see in the attached review video.
    view full answer...


< Previous
12



Do you have a question about this Trailer Jack?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Cole B
Installed by:
Cole B
Employee Shane H
Installed by:
Shane H
Employee Ed W
Installed by:
Ed W
Employee Chris R
Video Edited:
Chris R
Employee Wilson B
Updated by:
Wilson B
Employee Ronnie R
Updated by:
Ronnie R
Employee Mike S
Updated by:
Mike S
Employee Ryan F
Updated by:
Ryan F
Employee Amanda M
Written by:
Amanda M
Employee Zach D
Video by:
Zach D
Employee Samuel H
Video by:
Samuel H

At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.


<