See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• Can You Use 8,000 Lb Wheel Bearings on a 7,000 Lb Trailer Axle
  The wheel bearings for a 7,000 lb axle are not exactly the same as the wheel bearings for a 8,000 lb axle, the inner bearings are the same but the outer bearings are not, they have different outside diameters. Therefore, the two are not interchangeable. That said, even if you could upgrade this would not increase capacity nor should it really give you any more peace of mind. The weight capacity comes mainly from the axle beam and spindles. If you need replacements for your wheel bearings,...
  view full answer...
• Bearings and Races for 7,000 Pound Trailer Axle
  The most common bearings and seals for a 7,000 pound axle are # 25580 inner bearing, # 14125A outer bearing, # 25520 inner race and # 14276 outer race. The grease seal can vary, and will usually either be the # GS-2250DL, which has a 2.250 inch inner diameter and 3.376 outer diameter, or # GS2125DL with a 2.125 inch inner diameter and 3.376 inch outer diameter. We do also offer complete bearing kits for this axle. For the GS-2250DL grease seal, you can use the Kit # BK3-200. For the #...
  view full answer...
  
• Need Wheel Bearing Kit For Dexter 7,000 lb Axle
  Hey Ethan, thanks for reaching out. The correct bearing and seal kit for your Dexter 7,000 lb axles is going to be either the Bearing Kit part # BK3-210 which has a 2.125" seal or the Bearing Kit part # BK3-200 which has a 2.250" seal. This axle could have come with either size, so I suggest you pull a hub and measure the spindle where the seal rides, or just pull a seal and measure it to confirm. The other option is to just get one bearing kit and order the other seal; 2.250" part #...
  view full answer...
• Bearings, Seal and Brake Soes for 2016 Forest River Sierra with 7k Dexter Axles
  I am sure we can help with what you need but I can't look up your axle number. Can you get me the capacity or diameter of it? That would be all that I need.
  view full answer...
• Adding Brakes to 1999 Jayco Heritage Glacier with Dexter 2,500 lb Axles
  A Dexter 2,500 lb axle uses hubs that have inner and outer bearings of L44649 like the part # 8-257-5UC3 which has a 5 lug bolt pattern or the # 8-173-16UC3-EZ which has a 4 lug bolt pattern. These both come with bearings and seals as well. For brake assemblies you'd want the part # 23-47 for the left hand side and # 23-48 for the right hand side and you'd be set. I attached a help article link on adding electric brakes to a trailer for you to check out as well that I think you'll find...
  view full answer...
• Looking for Bearing Kit for 2023 Big Tex Equipment Trailer
  Hey Hoss, do you happen to know the axle capacities on your trailer? I'd imagine what you have is either a 6k or 7k axle setup but it's always a good idea to verify. If you do have a 6k axle the correct bearing kit would be the part # BK3-210 or 7k part # BK3-200.
  view full answer...
• Looking for Bearing Kit that Fits MORryde 7k Trailer Axle
  Hey Randy, so one of the great trailer replacement part mysteries is what grease seal a 7k trailer axle will use. Sometimes it's one with a 2.25 inner diameter and sometimes it's 2.125 inch. It seems like the most common for a 7k is the 2.125 inch but without any rhyme or reason that we have found it can be either. The # BK3-210 that you referenced comes with a seal that is 2.125 inch in inner diameter. What seal are you in need of?
  view full answer...
• What Grease Seals do I need If I have a 14136a Bearing With a 14276 Race
  Hey, Jeremy! I’d be happy to help! After doing some research, it looks like the 14136A bearing is typically used for industrial equipment. The trailer equivalent would be # 14125A, which uses the same race # 14276 you mentioned. All of the bearing kits we carry that include that bearing come with grease seal # RG06-070. I’m not sure what your exact measurements are, but this seal has a 2.250" inner diameter and a 3.376" outer diameter. If you’d rather get a complete kit instead of just...
  view full answer...
• Replacement Bearing Kit Recommendations for a 1972 Airstream Overlander
  If you have standard size axles that you are installing the Electric Trailer Brake Kit # AKEBRK-7-SA on then you can choose from the following options: 5,200 lb Axle - Kit # BK3-310 (Grease Seal 2.125" ID) or Kit # BK3-300 (Grease Seal 2.250" ID) 6,000 lb Axle - Kit # BK3-110 (Grease Seal 2.125" ID) or Kit # BK3-100 (Grease Seal 2.250" ID) 7,200 lb Axle - Kit # BK3-210 (Grease Seal 2.125" ID) or Kit # BK3-200 (Grease Seal 2.250" ID) Since you do have an older Airstream Overlander you...
  view full answer...
  
• Replacement Seals For a Dexter 130123 Axle
  Hey, Mike! Dexter shows that the 130123 axle is a 7k axle so would be using seal part # RG06-070. We offer complete kits that come with new seals, bearings, and races as well. That's kit part # BK3-210. Are you doing some maintenance on your trailer?
  view full answer...
• Bearing Kit that Fits Hub with Axletek-12HFB-GG
  Hey Carson, from the part number you mentioned that would indicate you have a 7k axle so for a bearing kit that includes correct seal you would want the part # BK3-210.
  view full answer...
• Bearing Kit Recommendation for Dexter 7,000 lb Torsion Axle
  Hey Richard, the correct bearing kit you want is the part # BK3-210 based on the info you gave me. You listed all of the correct info so that makes it really easy to pick out! Sometimes 7k axles use different seals but you gave that info so I know which seal you need. Are you wanting to keep a spare set on hand or did yours go out?
  view full answer...
• Looking For New Bearing Kits And Hubs For 2022 Grand design momentum 381M
  Hello Gary, thanks for reaching out. We should definitely have the correct bearings and hubs for you, but I will need a bit more info from you first. RV manufacturers do not get that specific with their online literature unfortunately. If you can tell me the weight capacity of each axle, that will help to narrow things down. If you remove a tire, there should be a number stamped on the front of each hub. Most of the time we can look up that number to know exactly what you need. Reply...
  view full answer...
• Timken Bearing Kit for Lipper 3,500 lb Axles
  Hi Daniel; the correct Timken bearing kit for your 3,500 lb Lippert axles is the # TMK52VR. The kit comes with the bearings, races, grease seal, cotter pin. and an EZ lube spindle washer.
  view full answer...
• Bearing Kit for 2024 Brinkley G3500 With 7k Axles
  Hey Wally! There are two possible bearing kits for your 2024 Brinkley G3500. You either need the Bearing Kit, 14125A/25580 Bearings # BK3-210 with a 2.125" inner diameter (ID) grease seal or # BK3-200 with a 2.25" ID grease seal. We don't have a way of knowing which grease seal is on there so you can either pull it and measure or if you send me a picture of your axle tag I can run it by the axle manufacturer to find out for you. Any big trips coming up with your Brinkley?
  view full answer...
• Bearing Kit and Grease for Dexter 7,000 lb Trailer Axle
  Hey Jason, since you have a Dexter 7,000 lb axle the correct bearing kit you would need is the part # BK3-210 which comes with the correct bearings and grease seal for a 7k hub. For grease I would recommend the LMX Red grease like part # L11390 for a 14 oz cartridge.
  view full answer...
• Replacement Grease Seal for a 5,200 lbs Dexter Axle
  Hey Carlos, thanks for the information and your patience. I reached out to Dexter with your information last week and still haven't heard back. There's two options to replace the grease seal on your Dexter 5,200 lbs axles. 2.125" ID - Grease Seal - Double Lip item # GS-2125DL 2.250" ID - Grease Seal - Double Lip item # GS-2250DL The most accurate way to determine the correct grease seal you need is to pull one of your hubs and check to see if there's a part number stamped into the side....
  view full answer...
• Availability Of Replacement Breakaway Cable For A TDE LP8000 Actuator
  Hey Nick, thanks for reaching out. The TDE LP8000 is an older actuator model that is no longer available. TDE was bought out by Dexter several years ago. The Dexter # 099-175-00 and # 099-175-20 actuators have the same design but they don't have a replacement breakaway cable for these either. Unfortunately, this means the only way to replace your broken cable is to get a new actuator
  view full answer...
• Replacement Bearing Kit with Grease Seal for Lippert 7k Axles
  Hey Cameron, the most common bearings on 7k axles are inner bearing # 25580 and outer bearing # 14125A. If those are your bearing numbers and the inner diameter of your grease seal measures 2.125 inches, you would want bearing kit # BK3-210, which includes the bearings, races and seal. Should your seal measure have an inner diameter of 2.25 inches, the bearing kit you want would be # BK3-200. For whatever reason the grease seal inner diameter is sometimes one size and sometimes the other...
  view full answer...
• What Bearing Kit do I Need for My 2024 Montana High Country 295rl with 7,000 Pound Axles?
  Hello Josh, Thanks for all the information, it is most helpful. I am showing that you have a #42 spindle. The # BK3-210 kit you were looking at was almost the right kit, the grease seal is the only thing that is not correct. You need one with a 2.25" I.D., so you will need the Bearing Kit, 14125A/ 25580 Bearings, 10-36 Seal # BK3-200 for your 2024 Montana High Country 295rl. If you don't have some grease on hand, make sure you grab some LubriMatic Prime Guard High Temperature Wheel Bearing...
  view full answer...
• Availability of Replacement Brakes, Bearings, and Seals Kit for 7k Axles
  Hey Josh! We don't have a kit that includes everything you listed but we do have bearing kits and then pairs of brakes. For the brakes you can use the etrailer Electric Trailer Brakes # AKEBRK-7-SA. If you want new mounting hardware use # BRKH12. The bearing kit will depend on the grease seal you need. If your grease seal has a 2.125" inner diameter you need # BK3-210 and if it has a 2.25" ID # BK3-200. If you aren't sure you can pull your hub and check for a part number, measure the...
  view full answer...
• Replacement Bearing Kit for Dexter 7,000 lbs Axles
  Hey Ryan, thanks for the information. We have two different bearing kits for Dexter 7,000 lbs axles. Item # BK3-210 and item # BK3-200 which has a a slightly larger grease seal. The bearings and races are the same size in both kits. Each kit will replace one hubs bearings, races, and seals. What you'll need to do is measure your spindle where the grease seal rides for it's inner diameter. That spot is labeled B on the diagram below. If it's 2.125" you need item # BK3-210. If it's 2.25"...
  view full answer...
• Replacement Bearings and Grease Seals for Dexter 7k Axle on 2021 Montana 3120RL Legacy
  Hi Katherine; Dexter 7k axles will use # 14125A and # 25580 bearings but the grease seal can vary. It either has a 10-36 grease seal # RG06-070 with a 2.25" inner diameter (ID) or # GS-2125DL with a 2.125" ID. Normally I would say to send me your axle tag information and I can verify with Dexter but they haven't been responding lately so it might take a while. The fastest way would be to pull the hub and either look for a part number on your existing grease seal or measure the ID. If...
  view full answer...
• Measurements of the Bearings and Races Included w/ the Bearing Kit BK3-210
  Hey Chris! The measurements for the bearings and races in the Bearing Kit item # BK3-210 are listed below: The Replacement Trailer Hub Bearing - 14125A item # 14125A has a inner diameter of 1.250". The Replacement Trailer Hub Bearing - 25580 item # 25580 has a inner diameter of 1.750". The Replacement Race for 25580 Bearing item # 25520 has a outer diameter of 3.265". The Replacement Race for 14125A Bearing item # 14276 has a 2.717" outer diameter. If you have any additional questions...
  view full answer...