Looking for Bearing Kit that Fits MORryde 7k Trailer Axle
Updated 11/13/2025 | Published 10/25/2025
Question:
I am looking for Bearing kits for 7000 lb Moryde independent suspension the kits you show on line match up bearing numbers but the seal numbers dont. could you let me know what kit I need.Thank You Randy
asked by: Randy R
Expert Reply:
Hey Randy, so one of the great trailer replacement part mysteries is what grease seal a 7k trailer axle will use. Sometimes it's one with a 2.25 inner diameter and sometimes it's 2.125 inch. It seems like the most common for a 7k is the 2.125 inch but without any rhyme or reason that we have found it can be either.
The # BK3-210 that you referenced comes with a seal that is 2.125 inch in inner diameter. What seal are you in need of?
Product Page this Question was Asked From
Bearing Kit, 14125A/25580 Bearings, GS-2125DL Seal
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- Bearing Kits
- Bearing 14125A and 25580
- Race 25520 and 14276
- 7000 lbs Axle
- etrailer
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Q&A: Bearings and Races for 7,000 Pound Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Q&A: Replacement Bearings for a Dexter 7,000 lbs Axle and Wet Bolts for a Morryde CRE 3000
- Article: Trailer Wiring Diagrams
- Q&A: Correct Replacement Bearings and Seals for Dexter 7,000 Lb Axle
- Q&A: Lug Nut Torque Spec for a 1/2 Stud with Coned Lugs on a 15 in Steel Wheel
- Q&A: Looking For Replacement Slipper Springs For My 7k Dexter Axle
- Q&A: Replacement Bearings, Races, and Seal for Lippert 7,000 Pound Axle
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Do I Have to Use Timken Races with Timken Bearings, or can I Use Mine that were Made in China?
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: How to Tell the Weight Rating of a Trailer Axle
Jameson C.
11/13/2025
Hey Randy, were you able to figure out which grease seal size your 7k MorRyde suspension uses? Knowing what ended up fitting could really help others sorting through the same bearing kit question.