See what our Experts say about this etrailer Trailer Bearings Races Seals Caps

• What Is the Weight Capacity Of a Dexter D100G Axle
  The spoke with Dexter and the code "D100G" tells me you have two 10,000 lb trailer axles. I have attached some parts you may need for the axle below. Dexter Trailer Hub Drum Assembly (After July 2009) - part # 8-430-5UC3 Dexter Trailer Hub and Drum Assembly (Before July 2009) - part # K08-288-90 Dexter Electric Trailer Brake Kit (12-1/4" x 4") - part # 23-438-439 Dexter Hydraulic Drum Brake Kit (12-1/4" x 4") - part # 23-404-405 Inner Bearing - part # 387A Inner Race - part # 382A Outer...
  view full answer...
• Replacement Brakes, Bearings, Seals, and Races for a Dexter 9,000 lbs Axle
  Hey Brandon, thanks for the information. The Electric Trailer Brake Kit w/ Dust Shields item # AKEBRK-10 are exactly what you need. These self adjusting electric brakes are rated for 9,000 lbs and 10,000 lbs axles. You will need one set per axle. I recommended replacing your mounting bolts with the Mounting Bolts and Hardware for 12-1/4" Brake Assemblies item # BRKH122510. This will replace one axle's brake mounting bolts and hardware. For replacement bearings and seals there is not a...
  view full answer...
• Determining Replacement Hub And Bearings For Dexter P-12 SLR Trailer Axle
  I can definitely help you find the correct replacement hub and bearings for your Dexter P-12 SLR axle, but since part of the serial number was unreadable you will need to take a few simple steps to identify which bearings your axle uses. The easiest way to accomplish this is to remove one hub and look for the numbers stamped on the inner and outer bearing like shown in the attached picture of the # L44649. If your bearings are too worn to be able to read the numbers, you will need digital...
  view full answer...
  
• Replacement Bearings, Races, Seal for Dexter 10k Trailer Axle
  Hey John, for a Dexter 10k axle the correct bearings would be # 387A, # 25580, and for the seal part # 10-51. For races you'd want the # 382A and # 25520. Did yours fail or do you want a spare set to keep on hand?
  view full answer...
• Replacement Brake Assemblies for Dexter 10k Axles on Gatormade Trailer
  We have what you need! Thanks for the photos. Even though the serial number is torn from the axle tag, we still identified the brakes you need with the Unique ID Number 124394998016 from your 10k Dexter axle tag. I confirmed with my tech at Dexter that you need the Dexter Electric Trailer Brake Assembly - Self-Adjusting - 12-1/4" # 23-450 (left side) and the # 23-451 (right side). These are direct replacements of brakes constructed for your 10k Dexter axles on your Gatormade trailer.
  view full answer...
  
• Replacement Grease Seal For A Dexter D1012 Trailer Axle
  Hey Ron, Dexter lists the bearings and races for the D1012 as: Inner bearing # 387A Inner race # 382A Outer bearing # 25580 Outer race # 25520 They unfortunately don't list the seal and since there's going to be differing seals that could fit that spindle so you'll really want to to use a caliper # PTW80157 to measure point B from the diagram to get the inner diameter of the seal and then measure the bore hole of the hub to get the outer diameter. If you can tell me those measurements...
  view full answer...
• Replacement Bearings and Brake Assemblies For 1998 Dexter 9000lb Axle
  Thank you for the pictures and information of your axle! I called Dexter and your Dexter P12 SLR axle with Serial Number D-423-4057 has a 9000lb axle rating, and uses an 8 on 6-1/2 hub and drum assembly with 5/8" studs like you mentioned. For replacement bearings there is not a kit that has all of the bearings and races but you can purchase them all separately as follows: Inner Bearing # 387A Inner Race # 382A Outer Bearing # 25580 Outer Race # 25520 Oil Seal # 10-51 And Oil Cap Kit...
  view full answer...
  
• Bearings, Seal, & Electric Brakes For Big Tex 22GN 35+5 Gooseneck Trailer
  I was able to find the correct electric brakes, as well as oil seal (which is what I assume you were referring to by wheel seal), and also the bearings for your Big Tex 22GN 35+5 gooseneck trailer. I'll go ahead and list out the parts for you below. - Oil Seal # 10-56 - Replacement Trailer Hub Bearing # 395S & Race # 394A - Replacement Trailer Hub Bearing # 387A & Race # 382A - Dexter Electric Trailer Brake Assembly - Left Hand # 23-438 & Right Hand # 23-439
  view full answer...
• Replacement Bearings and Seals for Dexter Axle 10K Axle with Oil Bath
  I can give you a few different options but to know the exact bearings, races, and seals you need for an oil bath on your 10K Dexter Axle you will need to take some measurements on your spindle using a digital caliper or by finding the part numbers on these pieces. Attached is a photo to show you where the part numbers are located as well as where you will need to measure on your spindle. One set of common bearings/seals are inner bearing # 387A (2.250" inner diameter) with race # 382A,...
  view full answer...
  
• Replacement Hub Options For a Dexter D1012 With Bearings 387A and 25580
  Here is your options for a Dexter D1012 with the Inner Bearing # 387A, Inner Race # 382A, Outer Bearing # 25580, and Outer Race # 25520. Idler Hub Prior July 2009 # 8-288-3UC1 Idler Hub After April 2013 # 008-430-03 Hub/Drum Prior July 2009 # K08-288-90 Hub/Drum After July 2009 # 8-430-5UC3 All but the Idler Hub After April 2013 # 008-430-03 include all the bearings and seals. For this you will have to also add the following components for each hub. Inner Bearing # 387A Inner Race #...
  view full answer...
• Replacement Bearings For Dexter Model D1012 Axle
  Thanks for the picture! I sent that over to my contact at Dexter and your axle uses the following components: Inner bearing # 387A Inner race # 382A Outer bearing # 25580 Outer race # 25520
  view full answer...
  
• Recommended Brakes, Bearings and Seals for Dexter 10k General Duty Axle
  I reached out to Dexter and found that your axle is a 10,000 lb general duty axle. The correct inner bearing and race is the # 387A and # 382A, the correct outer bearing and race is the # 25580 and # 25520. For a replacement seal you want the # 10-51. For electric brakes I recommend the Dexter Electric Trailer Brake Kit - Self-Adjusting - 12-1/4" - Left/Right Hand Assemblies - 10K # 23-438-439. These are self-adjusting brakes so there will be no need for manual adjustment. I have attached...
  view full answer...
• Replacement Bearings and Seal for Dexter 9,000 Pound Axle
  For your Dexter 9,000 pound axle, you will need the Inner Bearing # 387A and Race # 382A, along with the Outer Bearing # 25580 and Race # 25520. The correct oil seal should be part # 10-51, which features a 2.875 inch inner diameter and 3.880 inch outer diameter. These bearings and seal are not available as a complete kit, so they will just need to be purchased individually.
  view full answer...
• Bearings, Races and Oil Seals For Dexter 10K Axle On a 2018 Big Tex 22GN Trailer
  When you replace your Brakes # 23-450-451 it is a good idea to inspect the bearings at that time. The bearings and races will only need to be replaced if they are damaged or grooved. A visual inspection of the seal will tell you if it leaking or you notice any damage to the seal. Depending on if your Dexter 10K axle is a general duty or heavy duty will decide the bearings and oil seal you will need. If you are unsure you can send me the axle serial number that is stamped in the rear portion...
  view full answer...
• How to Pick Out Bearing for 10,000 lb Dexter Axle
  We have the bearing part # 387A which is over 2 inches in inner diameter and is seen on 10,000 lb axles but I'd have to know exactly what your spindle dimensions are to know for sure what you'd need. If you can use a digital caliper like the # PTW80157 to get me the exact dimension of the spindle where the bearings and seal ride I'll be able to let you know which parts you need. A very common bearing combo for Dexter 10k axles is # 387A and # 25580. Races needed are # 382A and # 25520....
  view full answer...
  
• Replacement Brakes, Drums, Hubs & Bearings For Dump Trailer With 10K Dexter Axles Manufactured 2006
  Thank you for the serial number as this allows me to confirm all the components installed when the axle was built. For a trailer with 2 of these axles you will need the following components to change out all the parts. The brakes are 12-1/4" x 3-3/8". Dexter Left Electric Brake # 23-450 Qty 2 Dexter Right Electric Brake # 23-451 Qty 2 Dexter Trailer Brake Drum # 9-44-1 Qty 4 We do have the Dexter Trailer Hub and Drum Assembly # K08-288-90 if you want to replace the entire hub as well...
  view full answer...
• Replacement Hubs and Bearing Parts For a Dexter 10,000LB General Duty Axle Prior To July 2009
  Your Dexter axle is a 10,000lb general duty axle that was manufactured on 1/31/01. That is all information I was able to obtain from Dexter due to the age of the axle. It will use either the Dexter Trailer Idler Hub # 8-288-3UC1 or the Dexter Trailer Hub and Drum Assembly # K08-288-90 with the Dexter Electric Brake Kit # 23-450-451. If you are looking for a bearing kit you will need to get the following components as we do not have a kit with everything you need. Inner Bearing # 387A Inner...
  view full answer...
• Bearings For 10,000 Lb Dexter Axle
  My contact at Dexter was able to use your Dexter Axle number 4389878 and Serial number 125263858 to find the bearings. She said your hub uses outer bearing 031-030-02, outer race 031-030-01, Inner bearing 031-019-02 and Inner race 031-019-01. These parts are equivalent to the inner bearing # 387A outer bearing # 25580 and race # 382A and race # 25520.
  view full answer...
  
• Bearing, Races, and Cap for 10,000 lb Dexter Axle
  The bearings you need are # 387A and # 25580. Races needed are # 382A and # 25520. The oil cap kit you need is part # RG04-300. If you need a seal too you would need the part # 10-51.
  view full answer...
• Replacement Parts For Dexter 10,000LB Trailer Axle On 2019 PJ Trailer
  Your Dexter axle SN 125272197 came with the Dexter Electric Brake Kit # 23-450-451. It uses the following bearings and seals. Inner Bearing # 387A Outer Bearing # 25580 Inner Race # 382A Outer Race # 25520 Oil Seal # 10-51 Oil Cap # RG04-300
  view full answer...
• Recommended Kodiak Disc Brake Kit for a Dexter 10K Axle
  The disc brake kit I recommend for a Dexter 10,000 Lb Axle is the Kodiak Disc Brake Kit part # K2R1058D11E which will also require the Dexter Oil Hub for 9K to 10K General Duty Axles part # 008-430-03. Please note this setup is designed for axles made after May 2013 with leaf springs so if you have something different please just let me know. The manufacture's date code is listed on the axle tag in the center of the beam. If you don't want to reuse the old bearings/races and seals you'll...
  view full answer...
• Bearing Recommendation for a Dexter 10k General Duty Axle
  For the Dexter General Duty 10k axles the recommended bearings that we carry are the inner bearing # 387A, outer bearing # 25580, race # 382A, and race # 25520. We have confirmed with Dexter that these are the correct parts.
  view full answer...
• Replacement Bearings, Races and Oil Seal Used In Dexter Bearing Kit K71-722-00
  While we do not have a kit that includes everything from the Dexter K71-722-00 bearing kit we do have all the parts that are included with the kit. Inner Bearing # 387A Inner Race # 382A Outer Bearing # 25580 Outer Race # 25520 Oil Seal # 10-51
  view full answer...
• Is Dexter Hub Drum Assembly # 8-430-5UC3 Available in Individual Parts?
  The Dexter Trailer Hub Drum Assembly - 9K to 10K - 8 on 6.5 - Oil Bath - Non-ABS Drum - After July 2009 # 8-430-5UC3 comes as the complete kit and the hub/drum is not available separately. The bearings, races, seals, and caps are available separately: Inner Bearing # 387A Outer Bearing # 25580 Inner Race # 382A Outer Race # 25520 Oil Seal # 10-51 Oil Cap Kit # RG04-300
  view full answer...

Do you have a question about this Trailer Bearings Races Seals Cap?