Jeep Grand Cherokee 4xe Off Road Lights

Hey Christian, welcome to the world of RV-ing! So in addition to the Roadmaster Nighthawk #RM-676 you're also goin to need: - A baseplate kit, like the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5. These attach to the Jeep itself so you…

Hey Gary that's a great question and the answer is yes! However, you're going to need the Firestone Heavy Duty item #F56VV over the Standard Duty item #F2610. The Firestone Air Bags item #F56FV, that fit your 2024 GMC Sierra 3500, are the Red…

Hey Robert, there was a big enough change between the 2022 and 2023 models of the F-450 that Air Lift had to release a new fit for the trucks. So for your 2025 F-450 you would need the Air Lift LoadLifter 5000 part #AL57399. It's pretty common…

Hey Bob, thanks for reaching out! In order to get the Aries 20" Single-Row LED Light Bar #AA1501262 to work in tandem with your high beams, you're going to need to tie in the power wire to your high beam light circuit. I'm not sure what…

Hey Jorge, yes we have the Vision X Light Cannons Off-Road Light Kit #CTL-CPZ620KIT in stock and available!

Hey Laura. The top of the 24x60 etrailer Enclosed Cargo Carrier item #e54VV can not be removed. Additionally, the cage around the carrier is not rated to have things stored on top of it. The sides of the cage will not be able to support the gear in…

Hey Al! You will not have to remove any body cladding from your 2025 Grand Cherokee to install the Romik RZR Running Boards #RMK59QR. The brackets bolt on underneath the vehicle without removing any of the cladding so the vehicle will look the same…

Hey Chris, thanks for reaching out! The Yakima 54" Tracks for Roof Racks #Y26RR are designed to work with RailRider 1 Towers or Landing Pad 1 with SkyLine or Control Towers, so they aren't compatible with the Mounting Hardware #Y83FR, but…

Hey Robert, The bracket kit #RP58386 you were looking at is a confirmed fit for your Ram but it's just the frame mounting brackets without any hardware included. If you're needing the hardware separately you can use part #58164. You can get…

Hello Joeseppi, Let's get you into the right camper tie-down. Just as long as your 2021 Ford F-350 does not have factory flip-out steps that are mounted under the bed you will want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear…

**UPDATE WITH KIT #DX35ER IN COMMENT SECTION BELOW** Hey Richard, thanks for reaching out! It sounds like you're needing the Kodiak Disc Brake Kit #KOD77FR which comes with new hubs/rotors, matching calipers, and the oil bath parts. In order to…

The Dexter DX7.5L A-60 brake actuating coupler, part #DX89FR would be a direct replacement for the Dexter 34044 Disc Brake coupler you mentioned.