Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Part Numbers: K2AVAL8219,C31067
Retail:$2,405.94
Our Price: $2,021.38
You Save: $384.56
This item qualifies for Free Truck Freight Shipping
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meDetail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall
part number: K2AVAL8219
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab.
Features:
- Hitch-mounted snowplow lets you clear paved and gravel parking lots and driveways with your vehicle
- Electric winch raises and lowers plow with sturdy, nylon strap
- 2.4 GHz Wireless remote control allows you to operate the plow from the comfort of your vehicle
- In-cab switch serves as a reliable backup to the remote control
- Adjustable, 3-position blade can be manually angled left, right, and straight ahead
- Strong rubber deflector on top of plow directs snow down and away from your windshield
- Hardened steel edge breaks up packed snow and ice
- Skid shoes let you adjust plow height to scrape over gravel and uneven surfaces
- Shock-absorbing springs let plow tip forward on impact to protect you and your vehicle
- Can extend life of the plow if you hit an obstruction
- Blade stiffeners provide 2 additional points of contact between the plow and your hitch for a sturdy connection
- Red visibility markers help you see plow edges so you can steer away from obstacles
- Flip-down caster wheels allow you to roll the plow where you need it for mounting or storage
- Wheel height is adjustable to match your vehicle height
- Plow handle with knob lets you easily move plow up and down during mounting
- Safety chain holds plow in raised position during travel
- Reinforced, all steel construction has black, rust- and UV-resistant powder coat finish
- ISO certified
- Simple installation
- Slides into your vehicle's 2" front trailer hitch receiver
Specs:
- Application: 2" x 2" hitch receivers
- Cannot be used with hitches or receiver adapters that have built-in drops
- Blade dimensions: 82" wide x 19" tall
- 3 Blade angles:
- Left 45 degrees
- Straight ahead
- Right 45 degrees
- Distance from center of hitch pin hole to the front edge of plow: 50"
- Winch lift capacity: 3,000 lbs
- Weight: 265 lbs
- 1-Year limited warranty
The Detail K2 snowplow conveniently slides into your vehicle's front-mounted trailer hitch for fast, simple mounting. Easily raise and lower the plow from the comfort of your cab with the remote-controlled electric winch. The pivoting blade makes this plow ideal for rocky or uneven surfaces because it can adjust to the terrain.
Simple, Hitch-Mounted Installation
This hitch-mounted snowplow simply slides into your vehicle's front trailer hitch receiver, making it a breeze to install. A plow that attaches to custom-fit brackets ties you down to just 1 vehicle. But this hitch-mounted plow can be used on most trucks or SUVs with a 2" x 2" front-mounted hitch. As a result, this plow can be easily switched between multiple vehicles. And because it offers a nearly universal fit, you won't have to buy a new plow when you replace your old vehicle.
To install the snowplow, just slide the shank of the plow assembly into your 2" trailer hitch receiver (sold separately). Then use a pin and clip or a hitch lock (sold separately) to secure the plow in the receiver.
The snowplow comes with flip-down caster wheels that make the installation process even easier on you. Simply flip the wheels into position and you will be able to roll the plow into position for mounting or storage. The height of the wheels can also be adjusted to match the height of your vehicle.
How to Plow
Once the plow is mounted on your vehicle, lower the blade and set it to the desired angle. To set the angle, exit the vehicle and manually position the plow straight ahead, to the left, or to the right. Angling the blade allows you to push snow off to the side where you want it without having to change the angle of your entire vehicle. This is especially useful on a driveway or a private roadway where piling the snow straight ahead would create a barrier.
The plow comes with a wireless remote that allows you to stay warm and out of the elements while still effectively controlling the plow. The remote operates on a 2.4 GHz frequency, allowing it to quickly send signals to the winch without experiencing delays. And because it's wireless, you won't have to run wires through your dash. Nor will you have to leave your window cracked open in the middle of a snow storm just so that you can run a wired remote into your cab. You will be glad to have it on those cold winter days.
To begin plowing, just drive forward. When backing up to take another pass, be sure to lift the plow with the remote, then lower it again before moving forward. When approaching a large pile of snow, be sure to decrease your speed. Slamming into a pile of snow can void the warranty on the snowplow.
When you are finished, put your vehicle in park and lower the plow. Remove the plow from your vehicle after every use.
Easy Lifting with Electric Winch
The electric winch on this plow allows you to easily lift and lower the blade using the wireless remote control. If you prefer, you can also install the included in-cab toggle switch to control the plow. The winch uses a durable strap, which is much quieter than a chain, to raise and lower the plow.
Detail K2 Features
The snowplow features skid shoes that allow you to adjust the height of your plow. This allows you to efficiently plow over surfaces that are uneven, such as gravel roads.
Blade stiffeners, or blade support brackets, reinforce the connection between the plow and your vehicle. They add 2 additional points of contact with your hitch on either side of the plow's T-frame. This prevents stress on the frame and on your vehicle, while also strengthening the performance of the plow.
Shock-absorbing springs allow the plow to dip forward in the event that you hit an obstruction. This flexibility protects you and your vehicle from impacts.
AVAL8219 Detail K2 Hitch Mount Snow Plow - 82" Wide x 19" Tall Blade
Item # K2AVAL8219
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
part number: C31067
Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.
Features:
- Front-mount hitch provides attachment point for hitch-mounted accessories
- Winch, spare tire carrier, snowplow, cargo carrier and more
- No more blindly backing trailer in - just hook it up and drive it forward
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Easy, bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over steel resists corrosion
- Sturdy, square-tube design
- Assembled in the USA
Specs:
- Line pull: 9,000 lbs
- Vertical load: 500 lbs
- Gross trailer weight: 5,000 lbs
- Receiver opening: 2" x 2"
- Pin hole diameter: 5/8"
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
31067 Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2"
Customer Reviews
Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall - K2AVAL8219
Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" - C31067
Average Customer Rating: 4.5 out of 5 stars (50 Customer Reviews)
Hitch-mounted residential plow has shock-absorbing springs and a steel-edge blade to easily clear driveways and parking lots. 3-Position blade pushes snow straight ahead, right, or left. Wireless remote lets you raise or lower plow from your cab. Easily attach a variety of accessories to the front of your vehicle with this fully welded, corrosion-resistant trailer hitch receiver. Perfect for winches, spare tire carriers and more.by: Ray01/02/2023
Great easy plow to use. The hardware that came in was missing a couple nuts and bolts. Had to run to the hardware store a couple times to get the proper bolts and nuts. The plow doesn't come assembled. So expect a good evening to build this unit. First two years was great and the scraping was good. Back dragging slacks but again a lot of plows do that. So it's not terrible but does enough. Just leaves 1/4 of snow behind. But pushing snow forward works and scrapes nice on asphalt or concrete. The battery that came with the kit for the wireless controller didn't last 1 month. So be prepared to upgrade that. But it's been now on my 3rd year, one of the springs failed on it and currently searching for the replacement. The plow itself has a one year warranty so of course it's past due now. Overall it works and it's nice. Wish I had bought the power left and right but the manual lever works too. Also the side markers prematurely failed too so I had to buy meyer yellow ones from fleet farm. Cost another $xx. But I will update this as time goes.
by: Daniel12/20/2022
It has been working very well as we have actually had a decent amount of snow so far this year. took a little longer than I thought it would to assemble and mount it but after it was on it works great and looks good.
by: Colin01/24/2024
Overall I love the front hitch and it's fit on my 2017 RAM 3500.
There's been some reviews talking about the packaging and also about the installation, so here's my experience.
The box was sturdy and was shipped via UPS. It arrives undamaged. There was some extra carboard added across the top of the box presumably to help protect the receiver.
When I opened the box I noticed that one of the brackets was slightly bent. I thought this may have happened during shipping, so I placed the receiver in my bench vice and gently brought it back to square. DON'T DO THIS. It appears the slight bend in the bracket is intentional. The receivers fits very snugly to the truck frame so that bend it to make installation easier. When I tried to install the receiver it was so tight I could not get it up into the truck frame. I ended up bending it back out of square (about 1/4" on each side). After I re-bent the brackets slightly it fit great. When you torque down the blots the brackets come back to square and everything was perfect.
My only minor criticism is with the instructions tell you to cut out a portion of the lower plastic deflector on your truck. The instructions tell you to cut a piece that is 4/25" wide. It doesn't need to be that wide for this truck - it could have been the same width as the 2" receiver. It's not a huge deal, but if you want a really tight fit on your deflector, then just cut it smaller.
The whole process, including the extra unnecessary bracket bending, took me about 2 hours to complete on my own. I used jack stands to support the bracket during the install, but an extra pair of hands would have made the process much quicker.
by: Aaron01/23/2021
The DK2 plow and hitch are awesome! As always, the communication from Etrailer from order to delivery is top-notch. Assembling the plow and mounting the hitch was easy. Took about 4 hours with me enjoying a few beers and taking my time one evening after work. Took on wiring the next day. I like a clean finish, so this part took me about 2 hours. I placed the control module on the fuse block as suggested (etrailer's videos are a BIG help). I placed the remote transmitter on the drivers side. I ran the plow lead down to the hitch from inside the vehicle. There is just enough wiring supplied and this allows me to tuck the connector inside the hitch when not in use. A hitch cover protects it from the elements. First use was 30" of snowfall! I plowed for about 3 hours straight. The engine compartment did get warm which made the control wiring warm and pliable; so the connector came out of the control module mid way through plowing. I used some dielectric grease and it stayed connected the remainder of my plowing. It takes some practice to hitch up to the plow easily. This set up took a beating first time out. Sure glad I ordered it!!
by: Andy F01/20/2023
2015 Ram 3500
Seems nice and solid, should be strong enough to haul my 425lb motorcycle + 60lb carrier. Based on some of the reviews about what a pain it was to install I decided not to mess with it and take it to a hitch shop. They confirmed some of the complaints I read here so it was money well spent.
by: Dave06/27/2021
2017 Ram 3500
I was hoping this would be a simple install, but it turned out to be a nightmare! I have a 2017 3500 Ram 4x4 with a heavy brush guard that was installed when I purchased the truck for $[XX] installed.
I took this Curt 31067 to a shop and was charged over $[XX] with tax to have it installed, luckily the labor rate was only $[XX] and they charged a little less time than it actually took. They said they had to remove the brush guard and even then the holes did not all line up correctly. Now I'll need an extension too (of course). So I figure I'll have about 1k in this when finished, adding the kike rack and accessories to haul two bicycles to Arizona I'll be over $[XX] haha. Live and learn, right?
by: Eric12/27/2017
This hitch is definitely heavy duty and mounts securely. It does not block airflow to the radiators or interfere with the bumper proximity sensors. It deserves 5 stars from that perspective. But I give it 4 stars because unfortunately the distance between the side plates was 3/4" too narrow to rotate into place. It would not clear the frame rails, brackets, and spacers. Actually it wouldn't even clear the frame rails alone. My son and I read the instructions many times and experimented with every possible angle (which is a major hassle while supporting the hitch under the truck) and finally took the matter into our own hands. We used a high lift jack situated between the side plates to bend them outward. Then the hitch fit perfectly. Getting the bumper lined back up was another headache, but not because of the hitch.
by: Kimber11/15/2022
1993 Chevrolet Suburban
The plow works very well. It's not real heavy duty but it has been adequate so far. It went together quite easily and is fairly light and maneuverable when I take it off for the summer. I am glad it has the extra turnbuckle braces beside the receiver to stiffen it up. I almost wish I had gotten a wider plow. When I have it set for straight forward it is good but when I have it angled it is a bit narrow for my Suburban. One minor problem I had was when I hit a hard object and the plow snapped forward and down both of the little red plastic end markers that stick up broke off. Long exposure must weaken the plastic.
by: David09/22/2022
As other reviews indicate, the hitch was not properly packaged and arrived with a bent flange sticking out of a destroyed box. Thankfully the hardware is now encapsulated in tape and stuck to the hitch so it didn't fall out. I informed etrailer of the damage and was advised to put it in my vice and bend it back. I don't have a vice so I pounded it out with a sledgehammer to get it to fit (very tight but I got it on). Instructions are unclear at best so plan on fitting this thing on more than once, and you really do need a helper with reasonable strength (if you can't bench 135, you can't install this). The kicker is that the torque spec on the main bolts is 160lb - try doing that with the truck on the ground so you can't use an extension (the 98lb for the bumper bolts was hard enough). Finally, note that this does not reach flush with the front of the bumper so it's recessed - I installed it to use with a motorcycle mount and while it worked (very close to grill), the folding mechanism won't allow the rack to clear the grill. At the end of the day, I'm still married and impressed with my wife's strength (apparently pilates works) and neither the hitch nor the bike have fallen off (yet).
by: Edd03/10/2024
Works great! Loving it.
by: Brad11/07/2022
Overall, I was satisfied. Instructions could be more complete, and it was missing a few bolts and nuts. But Looks like a solid plow for the application I need.
by: Richard04/27/2023
2014 Ram 3500
There's a packaging problem. The hitch came with the ears sticking through the cardboard and one ear was bent. Not a big deal to straighten out but you shouldn't have to. The handles on the cardboard are useless to the delivery guy since the hitch is falling through the packaging. I would flip the hitch over in the box so the receiver is down and add maybe 2 or 3 cardboard layer pads for the hitch to sit on to strengthen the floor. Maybe tape the ears to the side so it's not moving around. The delivery driver should be able to use the handles. Otherwise the hitch looks great, unfortunately forgot to take pictures of the box. Sounds like other people had the same problem .
by: Scott02/09/2022
Well worth the money! No longer having to worry about someone else coming to plow is a God send!!!
by: Larry02/26/2023
2017 Ram 3500
Several others have commented on the packaging, must agree, mine showed up with the 2” receiver hanging out of the box, I haven’t had time to look at the side brackets but I’ll assume they’re fine. Seems like an easy problem to fix with a reasonable return on investment for e-trailer.
by: David02/06/2018
DodgeRam Pickup
First the good news; it does fit the truck (2018 RAM 3500) without any drilling, just some trimming of the plastic air dam below the bumper is necessary, but that's easy enough. So I give it 4 stars, and would have given 5 but for the bad news.
The bad news is that etrailer doesn't pack these hitches very well to protect them from getting knocked around in transit. The hitch is heavy steel and it's just basically wrapped in a regular cardboard box with no protective bracing at all.
This is the second hitch I've bought from eTrailer which had this problem, the other being a front hitch for a Toyota Tundra.
What happens is they get dropped in the shipping process and the "wings" get bent so the distance between those wings become to small to fit over the frame rails in the vehicle. The first time it happened I didn't understand why the hitch wouldn't fit, so I called tech support at etrailer and they explained what they thought had happened and suggested I "spread" the wings back out by using a jack and a piece of wood.
I did that and the hitch then fitted just fine.
Now I get this one, and it had the exact same problem. Since this was not new territory this time I knew how to fix it, but it's still a pain to have to hunt around for just the right bits of wood etc and spend time on this extra step.
Judging by how quickly the tech support diagnosed the problem the first time around, I'm thinking this is something which happens often enough for them to be familiar with it. So it's a little surprising to me that etrailer hasn't come up with a fix.
A simple piece of wood (a 2 x 4, say) cut to exactly the right distance between the (unbent) wings, and held in place with tape or something would prevent the wings from getting bent inwards if (when is more like) it's dropped on one end in the warehouse or in transit.
I've done a fair bit of business over the years with etrailer, and they're a really great company to trade with. In fact this very issue of bent end wings on trailer hitches is the only fitment problem I've ever had with anything from them.
Once can be a fluke.
But twice is a pattern, folks. You should really fix this.
by: Daniel08/19/2023
Good for the price, really needs to be able to be able to angle from the cab of the truck. (deluxe model.)
by: Donald J01/11/2022
Jeep Wrangler
I love having this plow easy to install, easy to attach and remove on my 2 door Jeep Wrangler. I would recommend it to everyone looking for a plow.
by: Eric02/05/2022
2018 Ram 3500
Hard for me to understand why someone would complain about the shipping packaging I don’t care what the packaging is it gets thrown away anyway.
Fits like a glove, just as I would want it to. Installed by myself and took me about an hour and a half. The bolts turned out to be slightly short but easily resolved. This should be a great addition to my truck.
by: Kevin 10/28/2022
Works great even better than the old fisher plow even though this one swings manually, the blade goes much higher when pushing up banks of snow.
by: Tp Thomas01/18/2020
Difficult to put together - manufacturing quality is terrible - holes drilled off of center, causing plenty of work-arounds. In the end, it was a small plow with a complicated and messy assembly instruction. I resold it for $100 to get rid of the eye-sore. I don't recommend this at all.
by: Verlon h04/20/2019
The front mounted trailer hitch fit like it was supposed to and I’m happy with the mount.
I’m using it for a winch mount and it works great.
by: Rob 11/12/2019
2018 DodgeRam Pickup
Everything is just the way it was described to me at the time of sale. This hitch works great on the front of my 2018 Ram 3500 to haul my Honda Ruckus.
I am very happy with it.
What made it even better was the great service I received from Etrailer when I bought it. :)
by: Dean07/13/2019
2018 Ram 3500
Got reciever really fast,had it installed in a little over an hour with my wife's assistance on the jack.etrailer must have read previous reviews about damage during shipping,mine arrived in perfect condition,very happy.Plan on taking my grandson camping and needed the front hitch to haul our mountain bikes.Looking forward to the trip!
by: Brandon 08/22/2018
2018 DodgeRam Pickup
Great product. Fits perfectly on 2018 Ram 3500 dually. Read instructions throughly. Didn’t notice the start on passenger side at first which cost extra time installing. Works great with cargo tray for bicycles when towing 5th wheel camper.
by: Rob Z11/05/2016
DodgeRam Pickup
This is a Heavy Duty hitch. Didn't realize it was so robust. Took me about 2 hours, but I'm very methodical (slow). Had to have everything perfect. Installed this hitch for the purpose of a bike rack on the front of our Ram 3500. The bed holds a truck camper so this works out great. Perfect fit.....
25
50
Show More Reviews Ask the Experts about this Snow Plow
Do you have a question about this Snow Plow?
- Difference in Detail K2 Snowplow for 2" Hitches and the Detail K2 Elite Snowplow
- The Detail K2 Elite Snowplow for 2" Hitch, # K2AVAL8219ELT on your 2017 Nissan Frontier uses an electric actuator raise and lower the plow whereas the Detail K2, # K2AVAL8219 uses an electric winch.
The Detail K2 Elite Snowplow, # K2AVAL8219ELT has an internal clutch that prevents damage caused by overextension of the actuator. It also uses a chain instead of a strap on the other model.
For a front mounted hitch on your 2017 Nissan Frontier, I suggest the Draw-Tite Front Mount Trailer
view full answer... - Snow Plow Recommendation for 2019 Jeep Wrangler
- We have just what you'd need to install a plow on your 2019 Jeep Wrangler for the plow I recommend the Detail K2 Avalanche part # K2AVAL8219 which is 82 by 19 inches in size and comes with a winch setup to make raising and lowering the plow very easily from inside your vehicle. It has 3 blade angles it can be set at and comes with a wireless remote too.
To mount it on your vehicle the front hitch part # C31086 is a custom fit for your vehicle and is the hitch that Detail recommends
view full answer... - Detail K2 Avalanche Snowplow For 2004 Chevy Avalanche 1500
- I contacted Detail K2 snow plows and they have successfully mounted their plows on the 2004 Avalanche 1500. I recommend Detail K2 Avalanche Snowplow for 2" Hitches part # K2AVAL8219 and curt front mount hitch part # 31302. They do not have any notes stating any issues with the fit on a 1500.
view full answer... - Can you Install a Snowplow on a 2017 Ram 1500 4x4 with Electronic Steering Assist
- I spoke with all of the snowplow manufacturers we carry and none of them have ever heard of or had any issues with installing a snowplow on a 2017 Ram 1500 4x4. I would call the dealer to see if they say otherwise but I would not consider the statement to be true as all of the manufacturers state they have sold snowplows for this vehicle and have not heard back about the problem you described.
For your Ram, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 which installs
view full answer... - Will This Detail K2 Snow Plow Fit A 2016 F150 With A 4 Lift & 35" Tires?
- The Detail K2 Snowplow # K2AVAL8219 will fir your 2020 GMC Sierra 1500 even with the big 35" tires and lift. The potential issue is functionality. A plow attaches to your frame, which is now separated from your suspension by another 4 inches and then there's the distance to the ground depending on what size tires you're running. Using 35's will just make the distance even greater. That's where you'll see your plow not pushing properly. The plow needs to transfer and distribute loads back
view full answer... - Detail K2 Snowplow for 2001 Dodge Ram 1500 Sport
- All snowplow kits offered for the 2001 Dodge Ram 1500, shown on the linked page, exclude the Sport version from their fits. My technical contact at K2 advised that instead of a front-mount hitch you CAN use their Custom Mounting Bracket kit # K284309. This has no known compatibility issues with the Ram Sport according to my contact. With it you can use a plow like # K2RAMP8219.
view full answer... - Compatibility of Hitch-Mount Snow Plow on 2013 Ford F-150
- We offer a range of 2-inch hitch-mount snow plows that can work on your 2013 or 2014 model year Ford F-150 so long as it has a front-mounted 2-inch hitch receiver. I know of no particular issues with using a snow plow on the later model F-150s.
If you need a front hitch for your truck you can use the link at right to select a 2-inch hitch. Since you did not specify whether you have a 2013 or 2014 I have included two links, one for each model year, that you can use to select your truck
view full answer... - Will Agri-Cover SnowSport Front Mount Hitch Work With Snowplows on 1994 Jeep Wrangler YJ?
- The Agri-Cover SnowSport Front Mount Hitch A40163 for your 1994 Jeep YJ can work with some K2 plows, the Detail K2 Avalanche Snowplow # K2AVAL8422 which is 84" wide x 22" tall and weighs 283 lbs as well as the Detail K2 Avalanche # K2AVAL8219 which is 82" wide x 19" tall and weighs 265 lbs.
The Agri-Cover hitch will work with those K2 plows though it is designed to work with Agri-Cover SnowSport HD plows A40000HD which is 84" wide x 18" tall and weighs 114 lbs, A40040HD which is 96"
view full answer... - Can I Plow Wet And Heavy Snow With The Detail K2 Snowplow For Residential Areas
- I did some research and I got the following information. You will have to be careful plowing wet and heavy snow with the Detail K2 Snowplow for 2" Hitches - 82" Wide x 19" Tall, part # K2AVAL8219. According to K2, "Your K2 snowplow is not intended to clear the snow deposits created by large municipal or commercial snowplows, which contain heavy compacted, frozen lumps of snow and ice, and could damage the plow and vehicle.
view full answer... - Parts Needed To Mount Detail K2 Snowplow # K2AVAL8219 On Front of 2020 Nissan Frontier
- The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver # 31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow.
I recommend adding the Timbren Front Suspension Enhancement System # TFXF1004A as it is specifically designed to help support the front suspension when using a plow. This will help reduce the amount of front end sag when carrying the plow.
view full answer... - Available Front-Mount Hitch Receiver for 2007 Ford Explorer Sport Trac
- Only a front-mounted aftermarket hitch is offered for your 2007 Ford Explorer Sport Trac. This comes from Curt, part # 31545. This hitch has a 500-lb vertical load rating, making it a great way to add a snowplow like the hitch-mount Detail K2 # K2AVAL8219.
All aftermarket accessory items for your vehicle are shown on the linked page.
view full answer... - Recommended Snowplow to Use on a 2016 Chevrolet Silverado 1500 for a Personal Driveway
- For your 2016 Chevrolet Silverado 1500, I recommend using the Detail K2 Avalanche Snowplow part # K2AVAL8219 with the Curt Front Mount Trailer Hitch Receiver part # C31069 in order to plow your 800' long lane. The Avalanche Snowplow is 82" wide x 19" tall. It has an electric winch so you can make all of your adjustments in-cab, adjustable blade for precision plowing, and a rubber deflector on top which diverts snow away from your windshield. The other thing I like about this plow is that
view full answer... - Hitch and Hitch-Mount Snow Plow for 2010 Volkswagen Tiguan
- The Detail K2 Avalanche Snowplow for 2-Inch Hitches # K2AVAL8219 is intended to install into a 2-inch hitch receiver. In most cases a plow will be used on a front-mounted hitch but a rear-mounted hitch can also be used.
Rear-mounted 2-inch hitches are offered for your 2010 Volkswagen Tiguan, such as etrailer hitch # e98906, which is the one I recommend. This hitch installs without drilling but does require a bit of fascia trimming. All required hardware is included with the hitch.
view full answer... - Snow Plow And Hitch For A 2017 Ram 1500 Rebel 4x4
- The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 and the Curt Front Mount Trailer Hitch Receiver # 31374 will work for your 2017 Ram 1500 Rebel 4x4.
The Draw-Tite # 65062 has a line load capacity of 9,000lbs, and vertical load limit of 500lbs.
view full answer... - Front Mounted Trailer Hitch For A 2014 Ram 3500 Cab And Chassis
- The Curt # C21067 unfortunately does not fit so the only option we can offer would be an adjustable-fit, weld-on trailer hitch like the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This comes with a 7" drop or 16" with part # 41990-16 so that you can clear the front fascia.
view full answer... - Front Mount Trailer Hitch Receiver For A 2017 Ram 3500 Dually Megacab
- Yes, the Curt Front Mount Trailer Hitch Receiver # C31067 is a fit for your 2017 Ram 3500. This hitch fits all models of the 2017 Ram 3500 to include all 2 wheel, and 4 wheel drive options.
view full answer... - Does Curt Front Hitch # C31067 Fit 2014 Ram 3500
- We confirmed with Curt that the front hitch part # C31067 is a confirmed fit for your 2014 Ram 3500. I attached a diagram from the install instructions for this hitch for you to check out that shows how it attaches to the trailer frame.
view full answer... - Front Mount Hitch Recommendation for 2018 Ram 3500
- To carry your scooter on the front of your 2018 Ram 3500 I recommend the Curt Front Mount Trailer Hitch # C31067 because it has a 500 lb vertical load to support the approximately 320 lbs of weight you need to haul and is a bolt-on installation that will not require you to drill into the frame of your '18 Ram.
This hitch has a 2 inch receiver which will work with the 2 inch mount of your scooter carrier and if you have the factory tow hooks on your truck installing this hitch will allow
view full answer... - Will There be Any Modification Needed to Install the Curt Front Hitch on a 2017 Ram 3500
- When installing the Curt Front Mount Trailer Hitch Receiver, # C31067, the trimming of the front air dam may be required.
To get the hitch to fit under the bumper the air dam will most likely need to be trimmed to allow the receiver tube to set nice and flush up under the bumper.
If you click on the instructions link toward the bottom of the page you will be able to see the step by step instructions on how and where to trim the front air dam.
view full answer... - Curt vs Draw Tite Front Hitch for Motorcycle Carrier for 2017 Ram Megacab 3500
- Follow up to my previous question... My vehicle does have tow hooks so I could go with the Draw Tite but it looks like that would place the Rage motorcycle carrier much higher than the Curt. This might worsen visibility significantly. It also seems like it would make loading the bike much more difficult. Can you give me your opinion on this? Thank you.
view full answer... - Front Mount Hitch Recommendation for a 2015 Ram 3500
- Yes, the Curt Front Hitch part # C31067 that you referenced has been confirmed to fit your 2015 Ram 3500. I checked the installation instructions and there is no mention of having to remove the tow hooks so you will be able to retain those as well.
view full answer... - Recommended Front Mounted Trailer Hitch Receiver for 2018 Ram 3500
- The Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" # C31067 is the best option for a motorcycle carrier on your 2018 Ram 3500. I've attached the installation details for you and also a photo of this installed to assist. It is an easy installation and can hold up to 500 lbs.
Then you can use the etrailer Motorcycle Carrier # e98873 rated for 500 lbs and weighs 58 lbs or the Ultra-Fab Dirt Bike Carrier # UF48-979033 rated for up to 500 lbs and weighs 52 lbs so you could
view full answer... - Recommended Front Mounted Hitch Receiver for a 2018 Ram 3500
- I would be happy to help you find a front mount receiver hitch for your 2018 Ram 3500. I recommend the Curt Front Mount Hitch item # C31067. It has a 9,000 lbs line pull capacity and a 500 lbs vertical load limit.
I have attached pictures of both so you can see what the final product looks like. Whichever one you pick needs to be determined by your needs though. If you are going to be using a snow plow you will want the Curt item # C31067 because of the higher mounting point.
view full answer... - Front Hitch Recommendation for 2016 Ram 2500 Diesel
- For a 2016 Ram 2500 the correct Curt front hitch is the part # C31015 and not the part # C31067 that you referenced. I checked with Curt for this hitch and there are no fit exclusions for the diesel engine models.
This hangs below the front air dam which allows it to not interfere with the intercooler.
view full answer... - Snow Plow Setup for a 2016 Ram 3500
- I do have a front mount hitch and snow plow compatible with your 2016 Ram 3500 but according to American Expedition Vehicles (AEV), there is not a front mount trailer hitch compatible with the AEV front bumper installed on your vehicle therefore, you would not be able to use a snow plow on the Backcountry edition of your 2016 Jeep Wrangler.
For a snow plow and front mount hitch setup for your Ram, I recommend using both the Curt Front Mount Trailer Hitch Receiver part # C31067 and the
view full answer...
Info for these parts were:
Written by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
David
2/6/2019
One year later, Im still perfectly happy with this hitch. For the most part we use it to hold a bike carrier on the front of the truck when we go camping with our Arctic Fox in-bed camper. Its performed flawlessly, and is more than sufficiently heavy-duty for that kind of usage. Installation is straightforward enough, though an extra set of hands makes the process a lot easier. Over the years Ive bought several hitches, camper tie-downs, wiring harnesses and other items from eTrailer, and it is an excellent company to deal with.