Parts Needed To Mount Detail K2 Snowplow # K2AVAL8219 On Front of 2020 Nissan Frontier

Question

Question:

Does this plow come with the hitch that hooks to my 2020 nissan frontier

asked by: James A

1

Helpful Expert Reply:

The Detail K2 Snowplow for 2" Hitches # K2AVAL8219 does not include the Curt Front Mount Trailer Hitch Receiver # 31241 that is needed for your 2020 Nissan Frontier. The plow will come with all the wiring needed for the winch on the plow.

I recommend adding the Timbren Front Suspension Enhancement System # TFXF1004A as it is specifically designed to help support the front suspension when using a plow. This will help reduce the amount of front end sag when carrying the plow.

expert reply by: Bud M

1

Answer 1

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 2

Hi Stan! The SnowBear Snowplow for 2" Hitches - 82" Wide x 19" Tall #K2AVAL8219 and Curt Front Mount Trailer Hitch Receiver - Custom Fit - 2" #C31018 will definitely work on your 2013 Ford F-250 4x4. We actually have both of these…

view full answer...

Answer 3

Hey Dean, the Detail K2 Elite Snowplow part #K2AVAL8219ELT that you referenced comes with all of the electrical components it will need to install. It wires to the vehicle battery as well as comes with a wired switch that you would run to the cab of…

view full answer...

Answer 4

Thanks for your question, Shannon! I reached out to SnowBear to confirm which blade would be the replacement part. They let me know that part #K2SB8200 is the correct part you would need. It comes as 3 pieces totaling to the 82" that your plow…

view full answer...

Answer 5

Hey Steve. To replace the remote on your SnowBear Snowplow for 2" Hitches item #K2AVAL8219, you'll need the Replacement Wireless Remote Control for Detail K2 Snowplows item #K2WR100. The remote is programmed specific to the black solenoid…

view full answer...

Answer 6

The SnowBear snow plows have two mounting options on your 2019 Ford F-250. One is the brackets #K281530 and the other is the Curt Front Mount Trailer Hitch #C31078. I would choose the front mounted hitch since it will allow you to use other…

view full answer...

Answer 7

Curt front hitch #C31068 and Draw-Tite front hitch #65061 do indeed look very similar and this is because both are custom-fit products made specifically for your 2014 F-150. Since they both install at the same factory mounting points they will…

view full answer...

Answer 8

Allen, not much at all - it really depends on which HomePlow or WingMan you go with. The Meyer HomePlow #ME28FR comes with a wired auto-angling controller, but it can also run with Meyer’s optional wireless kit if you’d rather skip the cable…

view full answer...

Answer 9

You sure can David and congrats on the new truck! That's actually a pretty common practice when installing the Curt item #C55RJ. It's covered in the installation instructions I have linked below. The Curt Front Hitch item #C55RJ has been…

view full answer...

Parts Needed To Mount Detail K2 Snowplow # K2AVAL8219 On Front of 2020 Nissan Frontier

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching